mbox series

[net-next,v4,0/3] net: ethernet: mediatek: convert to PHYLINK

Message ID 20190825174341.20750-1-opensource@vdorst.com (mailing list archive)
Headers show
Series net: ethernet: mediatek: convert to PHYLINK | expand

Message

René van Dorst Aug. 25, 2019, 5:43 p.m. UTC 
These patches converts mediatek driver to PHYLINK API.

v3->v4:
* Phylink improvements and clean-ups after review
v2->v3:
* Phylink improvements and clean-ups after review
v1->v2:
* Rebase for mt76x8 changes
* Phylink improvements and clean-ups after review
* SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode.
  Refactor the code.


René van Dorst (3):
  net: ethernet: mediatek: Add basic PHYLINK support
  net: ethernet: mediatek: Re-add support SGMII
  dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the
    new phylink API

 .../arm/mediatek/mediatek,sgmiisys.txt        |   2 -
 .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  |  28 +-
 arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   1 -
 drivers/net/ethernet/mediatek/Kconfig         |   2 +-
 drivers/net/ethernet/mediatek/mtk_eth_path.c  |  75 +--
 drivers/net/ethernet/mediatek/mtk_eth_soc.c   | 521 ++++++++++++------
 drivers/net/ethernet/mediatek/mtk_eth_soc.h   |  68 ++-
 drivers/net/ethernet/mediatek/mtk_sgmii.c     |  65 ++-
 8 files changed, 470 insertions(+), 292 deletions(-)

Comments

Frank Wunderlich Aug. 26, 2019, 9:24 a.m. UTC | #1 
Tested on Bananapi-R2 (mt7623+mt7530) and Bananapi-R64 v0.1 (mt7622+rtl8367)

Tested-by: Frank Wunderlich <frank-w@public-files.de>

regards Frank
David Miller Aug. 28, 2019, 3:19 a.m. UTC | #2 
From: René van Dorst <opensource@vdorst.com>
Date: Sun, 25 Aug 2019 19:43:38 +0200

> These patches converts mediatek driver to PHYLINK API.
> 
> v3->v4:
> * Phylink improvements and clean-ups after review
> v2->v3:
> * Phylink improvements and clean-ups after review
> v1->v2:
> * Rebase for mt76x8 changes
> * Phylink improvements and clean-ups after review
> * SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode.
>   Refactor the code.

Series applied.