[V4,0/6] PCI: tegra: Enable PCIe C5 controller of Tegra194 in p2972-0000 platform

Message

Vidya Sagar Sept. 5, 2019, 10:45 a.m. UTC

This patch series enables Tegra194's C5 controller which owns x16 slot in
p2972-0000 platform. C5 controller's PERST# and CLKREQ# are not configured as
output and bi-directional signals by default and hence they need to be
configured explicitly. Also, x16 slot's 3.3V and 12V supplies are controlled
through GPIOs and hence they need to be enabled through regulator framework.
This patch series adds required infrastructural support to address both the
aforementioned requirements.
Testing done on p2972-0000 platform
- Able to enumerate devices connected to x16 slot (owned by C5 controller)
- Enumerated device's functionality verified
- Suspend-Resume sequence is verified with device connected to x16 slot

V4:
* Rebased (Patch-4/6 particularly) on top of Lorenzo's pci/tegra branch

V3:
* Addressed some more review comments from Andrew Murray and Thierry Reding

V2:
* Changed the order of patches in the series for easy merging
* Addressed review comments from Thierry Reding and Andrew Murray

Vidya Sagar (6):
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  PCI: tegra: Add support to configure sideband pins
  PCI: tegra: Add support to enable slot regulators
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform

 .../bindings/pci/nvidia,tegra194-pcie.txt     | 16 ++++
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 24 +++++
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |  4 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      | 38 +++++++-
 drivers/pci/controller/dwc/pcie-tegra194.c    | 94 ++++++++++++++++++-
 5 files changed, 172 insertions(+), 4 deletions(-)

Comments

Lorenzo Pieralisi Sept. 5, 2019, 11:20 a.m. UTC | #1

On Thu, Sep 05, 2019 at 04:15:47PM +0530, Vidya Sagar wrote:
> This patch series enables Tegra194's C5 controller which owns x16 slot in
> p2972-0000 platform. C5 controller's PERST# and CLKREQ# are not configured as
> output and bi-directional signals by default and hence they need to be
> configured explicitly. Also, x16 slot's 3.3V and 12V supplies are controlled
> through GPIOs and hence they need to be enabled through regulator framework.
> This patch series adds required infrastructural support to address both the
> aforementioned requirements.
> Testing done on p2972-0000 platform
> - Able to enumerate devices connected to x16 slot (owned by C5 controller)
> - Enumerated device's functionality verified
> - Suspend-Resume sequence is verified with device connected to x16 slot
> 
> V4:
> * Rebased (Patch-4/6 particularly) on top of Lorenzo's pci/tegra branch
> 
> V3:
> * Addressed some more review comments from Andrew Murray and Thierry Reding
> 
> V2:
> * Changed the order of patches in the series for easy merging
> * Addressed review comments from Thierry Reding and Andrew Murray
> 
> Vidya Sagar (6):
>   dt-bindings: PCI: tegra: Add sideband pins configuration entries
>   dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
>   PCI: tegra: Add support to configure sideband pins
>   PCI: tegra: Add support to enable slot regulators
>   arm64: tegra: Add configuration for PCIe C5 sideband signals
>   arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
> 
>  .../bindings/pci/nvidia,tegra194-pcie.txt     | 16 ++++
>  .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 24 +++++
>  .../boot/dts/nvidia/tegra194-p2972-0000.dts   |  4 +-
>  arch/arm64/boot/dts/nvidia/tegra194.dtsi      | 38 +++++++-
>  drivers/pci/controller/dwc/pcie-tegra194.c    | 94 ++++++++++++++++++-
>  5 files changed, 172 insertions(+), 4 deletions(-)

Applied to pci/tegra for v5.4, thanks.

Lorenzo