[v2,0/3] Add Caninos Loucos Labrador CoM and Base Board Device Tree

Message

Matheus Castello March 7, 2020, 12:24 a.m. UTC

Thanks Mani for your time reviewing it.

Changes since v1:
(Suggested by Manivannan Sadhasivam)
- Sort the entries alphabetically on Makefile
- Add title comment to the base board dts
- Remove the dt-bindings/leds/common.h (garbage from tests, sorry about that)
- Split the vendor-prefix and documentation in two patches

Caninos Loucos Labrador is a Brazilian project of open System on Modules and
Base Boards based on Lemaker Guitar. Is an initiative of LSI-TEC a non-profit
organization.

The Labrador CoM v2 is based on Actions Semi S500 processor with 16GB eMMC and
2GB RAM.

This series adds the initial work for device tree files and also adds the
vendor-prefix for the Caninos program. The work was based on the Andreas Färber
device trees for Lemaker Guitar, thanks Andreas.

Tested on my Caninos Labrador v2, only earlycon serial output is available for
now, using the fake clock. I have already worked on something here to add the
clocks and pinctrl nodes to owl-s500.dtsi, but I would like to first add the
initial device tree files and then work on the other patches calmly.

BR,
Matheus Castello

Matheus Castello (3):
  dt-bindings: Add vendor prefix for Caninos Loucos
  dt-bindings: arm: actions: Document Caninos Loucos Labrador
  ARM: dts: Add Caninos Loucos Labrador

 .../devicetree/bindings/arm/actions.yaml      |  5 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 ++
 arch/arm/boot/dts/Makefile                    |  1 +
 arch/arm/boot/dts/owl-s500-labrador-bb.dts    | 34 +++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi   | 21 ++++++++++++
 5 files changed, 63 insertions(+)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

--
2.25.0