[v2,0/6] soc: xilinx: vcu: provide interfaces for other drivers

Message

Michael Tretter April 14, 2020, 10:31 a.m. UTC

Hello,

This is v2 of the series to add interfaces that can be used by other drivers
to the xlnx_vcu driver. See [0] for the full motivation for this patch series.

In v2, the driver now also unregisters the registered clocks. I also dropped
the workaround for the syscon compatible in the dt bindings.

I would actually really appreciate feedback by Xilinx, because there are some
patches in the Xilinx downstream kernel that also try to expose the VCU
System-Level Control in an (IMHO) non-upstream-compatible way.

Michael

[0] https://lore.kernel.org/linux-arm-kernel/[e-mail]/

Changelog:

v1 -> v2:
- drop custom select for syscon
- unregister registered clocks on driver remove


Michael Tretter (6):
  soc: xilinx: vcu: drop useless success message
  ARM: dts: define indexes for output clocks
  soc: xilinx: vcu: implement clock provider for output clocks
  dt-bindings: soc: xlnx: extract xlnx,vcu-settings to separate binding
  soc: xilinx: vcu: use vcu-settings syscon registers
  soc: xilinx: vcu: add missing register NUM_CORE

 .../soc/xilinx/xlnx,vcu-settings.yaml         |  34 ++++
 .../bindings/soc/xilinx/xlnx,vcu.txt          |   9 +-
 drivers/soc/xilinx/Kconfig                    |   3 +-
 drivers/soc/xilinx/xlnx_vcu.c                 | 170 ++++++++++++------
 include/dt-bindings/clock/xlnx-vcu.h          |  15 ++
 include/linux/mfd/syscon/xlnx-vcu.h           |  39 ++++
 6 files changed, 212 insertions(+), 58 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
 create mode 100644 include/dt-bindings/clock/xlnx-vcu.h
 create mode 100644 include/linux/mfd/syscon/xlnx-vcu.h