| Message ID | 20200430222439.0ae1c4fa9572c8487fca96b6@linaro.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | dts: uniphier: Add Akebi96 Board support | expand |
On Thu, Apr 30, 2020 at 10:24 PM Masami Hiramatsu <masami.hiramatsu@linaro.org> wrote: > > Hello, > > Here is the 5th version of the patches to add a devicetree for > Akebi96 board. > > This version removes redundant setting of RGMII, fixes some > parameters for max3420-udc node and add the address to > framebuffer node name. > > The Akebi96 is a certified 96boards which is based on Socionext > UniPhier LD20 SoC. Most of the part is similar to LD20 reference > board, but there are some changes. > > - MAX3421 USB-SPI chip on SPI port3 (for USB gadget port.) > - Simple frame buffer with 1080p fixed resolution. > - I2S port which is connected to aout1b instead of aout1. > - 3 serial ports, only serial3 has CTS/RTS. > - No NAND, only eMMC on the board. > - OP-TEE installed firmware. > > See https://www.96boards.org/product/akebi96/ for details. > > Thank you, > > --- Both applied. > Masami Hiramatsu (2): > dt-bindings: arm: Add Akebi96 board support > arm64: dts: uniphier: Add support for Akebi96 > > > .../bindings/arm/socionext/uniphier.yaml | 1 > arch/arm64/boot/dts/socionext/Makefile | 1 > .../boot/dts/socionext/uniphier-ld20-akebi96.dts | 189 ++++++++++++++++++++ > 3 files changed, 191 insertions(+) > create mode 100644 arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts > > -- > Masami Hiramatsu <masami.hiramatsu@linaro.org> >
2020年5月4日(月) 10:22 Masahiro Yamada <masahiroy@kernel.org>: > > On Thu, Apr 30, 2020 at 10:24 PM Masami Hiramatsu > <masami.hiramatsu@linaro.org> wrote: > > > > Hello, > > > > Here is the 5th version of the patches to add a devicetree for > > Akebi96 board. > > > > This version removes redundant setting of RGMII, fixes some > > parameters for max3420-udc node and add the address to > > framebuffer node name. > > > > The Akebi96 is a certified 96boards which is based on Socionext > > UniPhier LD20 SoC. Most of the part is similar to LD20 reference > > board, but there are some changes. > > > > - MAX3421 USB-SPI chip on SPI port3 (for USB gadget port.) > > - Simple frame buffer with 1080p fixed resolution. > > - I2S port which is connected to aout1b instead of aout1. > > - 3 serial ports, only serial3 has CTS/RTS. > > - No NAND, only eMMC on the board. > > - OP-TEE installed firmware. > > > > See https://www.96boards.org/product/akebi96/ for details. > > > > Thank you, > > > > --- > > Both applied. Thank you so much!
Hello, Here is the 5th version of the patches to add a devicetree for Akebi96 board. This version removes redundant setting of RGMII, fixes some parameters for max3420-udc node and add the address to framebuffer node name. The Akebi96 is a certified 96boards which is based on Socionext UniPhier LD20 SoC. Most of the part is similar to LD20 reference board, but there are some changes. - MAX3421 USB-SPI chip on SPI port3 (for USB gadget port.) - Simple frame buffer with 1080p fixed resolution. - I2S port which is connected to aout1b instead of aout1. - 3 serial ports, only serial3 has CTS/RTS. - No NAND, only eMMC on the board. - OP-TEE installed firmware. See https://www.96boards.org/product/akebi96/ for details. Thank you, --- Masami Hiramatsu (2): dt-bindings: arm: Add Akebi96 board support arm64: dts: uniphier: Add support for Akebi96 .../bindings/arm/socionext/uniphier.yaml | 1 arch/arm64/boot/dts/socionext/Makefile | 1 .../boot/dts/socionext/uniphier-ld20-akebi96.dts | 189 ++++++++++++++++++++ 3 files changed, 191 insertions(+) create mode 100644 arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts -- Masami Hiramatsu <masami.hiramatsu@linaro.org>