[v3,0/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support

Message

Alexandre Belloni May 6, 2020, 8:05 a.m. UTC

This series mainly adds sama5d2 support where we need to avoid using
clock index 0 because that clock is never enabled by the driver.

There is also a rework of the 32khz clock handling so it is not used for
clockevents on 32 bit counter because the increased rate improves the
resolution and doesn't have any drawback with that counter width. This
replaces a patch that has been carried in the linux-rt tree for a while.

Changes in v3:
 - Moved the child node documentation to the parent documentation

Changes in v2:
 - Rebased on v5.7-rc1
 - Moved the binding documentation to its proper place
 - Added back the atmel,tcb-timer child node documentation

Alexandre Belloni (8):
  dt-bindings: atmel-tcb: convert bindings to json-schema
  dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible
  ARM: dts: at91: sama5d2: add TCB GCLK
  clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection
  clocksource/drivers/timer-atmel-tcb: fill tcb_config
  clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for
    clockevents
  clocksource/drivers/timer-atmel-tcb: allow selecting first divider
  clocksource/drivers/timer-atmel-tcb: add sama5d2 support

Kamel Bouhara (1):
  ARM: at91: add atmel tcb capabilities

 .../devicetree/bindings/mfd/atmel-tcb.txt     |  56 -------
 .../soc/microchip/atmel,at91rm9200-tcb.yaml   | 150 ++++++++++++++++++
 arch/arm/boot/dts/sama5d2.dtsi                |  12 +-
 drivers/clocksource/timer-atmel-tcb.c         | 101 +++++++-----
 include/soc/at91/atmel_tcb.h                  |   5 +
 5 files changed, 219 insertions(+), 105 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt
 create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml

Comments

Daniel Lezcano May 18, 2020, 4:03 p.m. UTC | #1

Hi Alexandre,

I would like to take the whole series but I need Rob's blessing for the
DT parts.

On 06/05/2020 10:05, Alexandre Belloni wrote:
> This series mainly adds sama5d2 support where we need to avoid using
> clock index 0 because that clock is never enabled by the driver.
> 
> There is also a rework of the 32khz clock handling so it is not used for
> clockevents on 32 bit counter because the increased rate improves the
> resolution and doesn't have any drawback with that counter width. This
> replaces a patch that has been carried in the linux-rt tree for a while.
> 
> Changes in v3:
>  - Moved the child node documentation to the parent documentation
> 
> Changes in v2:
>  - Rebased on v5.7-rc1
>  - Moved the binding documentation to its proper place
>  - Added back the atmel,tcb-timer child node documentation
> 
> Alexandre Belloni (8):
>   dt-bindings: atmel-tcb: convert bindings to json-schema
>   dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible
>   ARM: dts: at91: sama5d2: add TCB GCLK
>   clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection
>   clocksource/drivers/timer-atmel-tcb: fill tcb_config
>   clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for
>     clockevents
>   clocksource/drivers/timer-atmel-tcb: allow selecting first divider
>   clocksource/drivers/timer-atmel-tcb: add sama5d2 support
> 
> Kamel Bouhara (1):
>   ARM: at91: add atmel tcb capabilities
> 
>  .../devicetree/bindings/mfd/atmel-tcb.txt     |  56 -------
>  .../soc/microchip/atmel,at91rm9200-tcb.yaml   | 150 ++++++++++++++++++
>  arch/arm/boot/dts/sama5d2.dtsi                |  12 +-
>  drivers/clocksource/timer-atmel-tcb.c         | 101 +++++++-----
>  include/soc/at91/atmel_tcb.h                  |   5 +
>  5 files changed, 219 insertions(+), 105 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt
>  create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
>