| Message ID | 20201106165805.31534-1-amelie.delaunay@st.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | STUSB1600 support on STM32MP15xx-DKx | expand |
Hi, On 11/6/20 5:58 PM, Amelie Delaunay wrote: > This series adds missing bindings for Type-C typec-power-opmode property > and STUSB160x Type-C port controllers [1]. > STUSB160x driver requires to get power operation mode via device tree, > that's why this series also adds the optional DT property > typec-power-opmode for usb-c-connector to select the power operation mode > capability. > Tested on stm32mp157c-dk2 [2], which has a Type-C connector managed by > STUSB1600, and connected to USB OTG controller. > > [1] https://www.st.com/en/interfaces-and-transceivers/usb-type-c-and-power-delivery-controllers.html > [2] https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html > > > Amelie Delaunay (5): > dt-bindings: connector: add typec-power-opmode property to > usb-connector > dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller > usb: typec: stusb160x: fix power-opmode property with > typec-power-opmode > ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx > ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller > support > Device tree and bindings patches ([1],[2],[4],[5]) have been applied to stm32-next (and will go through arm-soc tree). Greg, I let you apply patch [3] into usb tree. Thanks Alex > --- > Changes in v5: > - add additionalProperties to st,stusb160x yaml > - add Heikki reviewed-by on stusb160x driver patch 3/5 > Changes in v4: > - power-opmode DT property renamed to typec-power-opmode and mutually > exclusive condition with new-source-frs-typec-current added > - Due to DT property renaming, patch 3/5 is added to update stusb160x > driver. > --- > .../bindings/connector/usb-connector.yaml | 24 +++++ > .../devicetree/bindings/usb/st,stusb160x.yaml | 87 +++++++++++++++++++ > arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 7 ++ > arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 30 +++++++ > arch/arm/configs/multi_v7_defconfig | 2 + > drivers/usb/typec/stusb160x.c | 2 +- > 6 files changed, 151 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml >
This series adds missing bindings for Type-C typec-power-opmode property and STUSB160x Type-C port controllers [1]. STUSB160x driver requires to get power operation mode via device tree, that's why this series also adds the optional DT property typec-power-opmode for usb-c-connector to select the power operation mode capability. Tested on stm32mp157c-dk2 [2], which has a Type-C connector managed by STUSB1600, and connected to USB OTG controller. [1] https://www.st.com/en/interfaces-and-transceivers/usb-type-c-and-power-delivery-controllers.html [2] https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html Amelie Delaunay (5): dt-bindings: connector: add typec-power-opmode property to usb-connector dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller usb: typec: stusb160x: fix power-opmode property with typec-power-opmode ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support --- Changes in v5: - add additionalProperties to st,stusb160x yaml - add Heikki reviewed-by on stusb160x driver patch 3/5 Changes in v4: - power-opmode DT property renamed to typec-power-opmode and mutually exclusive condition with new-source-frs-typec-current added - Due to DT property renaming, patch 3/5 is added to update stusb160x driver. --- .../bindings/connector/usb-connector.yaml | 24 +++++ .../devicetree/bindings/usb/st,stusb160x.yaml | 87 +++++++++++++++++++ arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 7 ++ arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 30 +++++++ arch/arm/configs/multi_v7_defconfig | 2 + drivers/usb/typec/stusb160x.c | 2 +- 6 files changed, 151 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml