[v7,0/5] mainline Kverneland boards

Message

Oleksij Rempel Jan. 11, 2021, 10:18 a.m. UTC

changes v7:
- add Acked-by: Rob Herring to the firs patch
- imx6qdl-vicut1.dtsi: add missing KEY_POWER
- imx6dl-victgo.dts: add missing gpio flags to rotary-encoder 
- imx6dl-victgo.dts: rename video@5c to video-decoder@5c 
- imx6dl-victgo.dts: sort out some spaces 

changes v6:
- move startup-delay-us close to gpio property
- imx6qdl-vicut1.dtsi: rename video@5c to video-decoder@5c
- imx6qdl-vicut1.dtsi: sort out some spaces
- use defines for linux,code and linux,axis

changes v5:
- reorder kvg prefix
- add Acked-by: Rob Herring.. 

changes v4:
- fix active level of SPI CS GPIOs

changes v3:
- add vicutp board
- change tvnorm to sdtv-standards
- change linux,default-trigger "mmc" to  "disk-activity";
- add power-supply property to the panel node

changes v2:
- add victgo board
- diff fixes for vicut1.dtsi

Oleksij Rempel (5):
  dt-bindings: vendor-prefixes: Add an entry for Kverneland Group
  dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards
  ARM: dts: add Kverneland UT1, UT1Q and UT1P
  dt-bindings: arm: fsl: add Kverneland TGO board
  ARM: dts: add Kverneland TGO board

 .../devicetree/bindings/arm/fsl.yaml          |   4 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/imx6dl-victgo.dts           | 852 ++++++++++++++++++
 arch/arm/boot/dts/imx6dl-vicut1.dts           |  13 +
 arch/arm/boot/dts/imx6q-vicut1.dts            |  17 +
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi         | 803 +++++++++++++++++
 arch/arm/boot/dts/imx6qp-vicutp.dts           |  13 +
 8 files changed, 1708 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-victgo.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-vicut1.dts
 create mode 100644 arch/arm/boot/dts/imx6q-vicut1.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-vicut1.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qp-vicutp.dts

Comments

Shawn Guo Jan. 18, 2021, 6:26 a.m. UTC | #1

On Mon, Jan 11, 2021 at 11:18:50AM +0100, Oleksij Rempel wrote:
> changes v7:
> - add Acked-by: Rob Herring to the firs patch
> - imx6qdl-vicut1.dtsi: add missing KEY_POWER
> - imx6dl-victgo.dts: add missing gpio flags to rotary-encoder 
> - imx6dl-victgo.dts: rename video@5c to video-decoder@5c 
> - imx6dl-victgo.dts: sort out some spaces 
> 
> changes v6:
> - move startup-delay-us close to gpio property
> - imx6qdl-vicut1.dtsi: rename video@5c to video-decoder@5c
> - imx6qdl-vicut1.dtsi: sort out some spaces
> - use defines for linux,code and linux,axis
> 
> changes v5:
> - reorder kvg prefix
> - add Acked-by: Rob Herring.. 
> 
> changes v4:
> - fix active level of SPI CS GPIOs
> 
> changes v3:
> - add vicutp board
> - change tvnorm to sdtv-standards
> - change linux,default-trigger "mmc" to  "disk-activity";
> - add power-supply property to the panel node
> 
> changes v2:
> - add victgo board
> - diff fixes for vicut1.dtsi
> 
> Oleksij Rempel (5):
>   dt-bindings: vendor-prefixes: Add an entry for Kverneland Group
>   dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards
>   ARM: dts: add Kverneland UT1, UT1Q and UT1P
>   dt-bindings: arm: fsl: add Kverneland TGO board
>   ARM: dts: add Kverneland TGO board

Applied all, thanks.