mbox series

[v4,0/5] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini

Message ID 20210225192404.262453-1-jagan@amarulasolutions.com (mailing list archive)
Headers show
Series arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini | expand

Message

Jagan Teki Feb. 25, 2021, 7:23 p.m. UTC 
Patch series for Engicam i.Core MX8M Mini SOM and it's associated 
carrier board dts(i) support.

Changes for v4:
- rebase on linux-next
- fixed Krzysztof comments
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
- keep min/max regulator hoping
- collect Krzysztof r-b
- fix dt-bindings

Jagan Teki (5):
  dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
  arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM
  arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
  dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
  arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit

 .../devicetree/bindings/arm/fsl.yaml          |   8 +
 arch/arm64/boot/dts/freescale/Makefile        |   2 +
 .../freescale/imx8mm-icore-mx8mm-ctouch2.dts  |  97 ++++++++
 .../freescale/imx8mm-icore-mx8mm-edimm2.2.dts |  97 ++++++++
 .../dts/freescale/imx8mm-icore-mx8mm.dtsi     | 232 ++++++++++++++++++
 5 files changed, 436 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi

Comments

Shawn Guo March 8, 2021, 12:55 a.m. UTC | #1 
On Fri, Feb 26, 2021 at 12:53:59AM +0530, Jagan Teki wrote:
> Jagan Teki (5):
>   dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
>   arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM
>   arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
>   dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
>   arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit

Applied all, thanks.