| Message ID | 20210507102211.8836-1-zhukeqian1@huawei.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | iommu/smmuv3: Implement hardware dirty log tracking | expand |
Hi all, The VFIO part is at here: https://lore.kernel.org/kvm/20210507103608.39440-1-zhukeqian1@huawei.com/ Thanks, Keqian On 2021/5/7 18:21, Keqian Zhu wrote: > Hi Robin, Will and everyone, > > I think this series is relative mature now, please give your valuable suggestions, > thanks! > > > This patch series is split from the series[1] that containes both IOMMU part and > VFIO part. The VFIO part will be sent out in another series. > > [1] https://lore.kernel.org/linux-iommu/20210310090614.26668-1-zhukeqian1@huawei.com/ > > changelog: > > v4: > - Modify the framework as suggested by Baolu, thanks! > - Add trace for iommu ops. > - Extract io-pgtable part. > > v3: > - Merge start_dirty_log and stop_dirty_log into switch_dirty_log. (Yi Sun) > - Maintain the dirty log status in iommu_domain. > - Update commit message to make patch easier to review. > > v2: > - Address all comments of RFC version, thanks for all of you ;-) > - Add a bugfix that start dirty log for newly added dma ranges and domain. > > > > Hi everyone, > > This patch series introduces a framework of iommu dirty log tracking, and smmuv3 > realizes this framework. This new feature can be used by VFIO dma dirty tracking. > > Intention： > > Some types of IOMMU are capable of tracking DMA dirty log, such as > ARM SMMU with HTTU or Intel IOMMU with SLADE. This introduces the > dirty log tracking framework in the IOMMU base layer. > > Three new essential interfaces are added, and we maintaince the status > of dirty log tracking in iommu_domain. > 1. iommu_switch_dirty_log: Perform actions to start|stop dirty log tracking > 2. iommu_sync_dirty_log: Sync dirty log from IOMMU into a dirty bitmap > 3. iommu_clear_dirty_log: Clear dirty log of IOMMU by a mask bitmap > > About SMMU HTTU: > > HTTU (Hardware Translation Table Update) is a feature of ARM SMMUv3, it can update > access flag or/and dirty state of the TTD (Translation Table Descriptor) by hardware. > With HTTU, stage1 TTD is classified into 3 types: > DBM bit AP[2](readonly bit) > 1. writable_clean 1 1 > 2. writable_dirty 1 0 > 3. readonly 0 1 > > If HTTU_HD (manage dirty state) is enabled, smmu can change TTD from writable_clean to > writable_dirty. Then software can scan TTD to sync dirty state into dirty bitmap. With > this feature, we can track the dirty log of DMA continuously and precisely. > > About this series: > > Patch 1-3：Introduce dirty log tracking framework in the IOMMU base layer, and two common > interfaces that can be used by many types of iommu. > > Patch 4-6: Add feature detection for smmu HTTU and enable HTTU for smmu stage1 mapping. > And add feature detection for smmu BBML. We need to split block mapping when > start dirty log tracking and merge page mapping when stop dirty log tracking, > which requires break-before-make procedure. But it might cause problems when the > TTD is alive. The I/O streams might not tolerate translation faults. So BBML > should be used. > > Patch 7-12: We implement these interfaces for arm smmuv3. > > Thanks, > Keqian > > Jean-Philippe Brucker (1): > iommu/arm-smmu-v3: Add support for Hardware Translation Table Update > > Keqian Zhu (1): > iommu: Introduce dirty log tracking framework > > Kunkun Jiang (11): > iommu/io-pgtable-arm: Add quirk ARM_HD and ARM_BBMLx > iommu/io-pgtable-arm: Add and realize split_block ops > iommu/io-pgtable-arm: Add and realize merge_page ops > iommu/io-pgtable-arm: Add and realize sync_dirty_log ops > iommu/io-pgtable-arm: Add and realize clear_dirty_log ops > iommu/arm-smmu-v3: Enable HTTU for stage1 with io-pgtable mapping > iommu/arm-smmu-v3: Add feature detection for BBML > iommu/arm-smmu-v3: Realize switch_dirty_log iommu ops > iommu/arm-smmu-v3: Realize sync_dirty_log iommu ops > iommu/arm-smmu-v3: Realize clear_dirty_log iommu ops > iommu/arm-smmu-v3: Realize support_dirty_log iommu ops > > .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 2 + > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 268 +++++++++++- > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 14 + > drivers/iommu/io-pgtable-arm.c | 389 +++++++++++++++++- > drivers/iommu/iommu.c | 206 +++++++++- > include/linux/io-pgtable.h | 23 ++ > include/linux/iommu.h | 65 +++ > include/trace/events/iommu.h | 63 +++ > 8 files changed, 1026 insertions(+), 4 deletions(-) >
Hi Robin, Will and everyone, I think this series is relative mature now, please give your valuable suggestions, thanks! This patch series is split from the series[1] that containes both IOMMU part and VFIO part. The VFIO part will be sent out in another series. [1] https://lore.kernel.org/linux-iommu/20210310090614.26668-1-zhukeqian1@huawei.com/ changelog: v4: - Modify the framework as suggested by Baolu, thanks! - Add trace for iommu ops. - Extract io-pgtable part. v3: - Merge start_dirty_log and stop_dirty_log into switch_dirty_log. (Yi Sun) - Maintain the dirty log status in iommu_domain. - Update commit message to make patch easier to review. v2: - Address all comments of RFC version, thanks for all of you ;-) - Add a bugfix that start dirty log for newly added dma ranges and domain. Hi everyone, This patch series introduces a framework of iommu dirty log tracking, and smmuv3 realizes this framework. This new feature can be used by VFIO dma dirty tracking. Intention： Some types of IOMMU are capable of tracking DMA dirty log, such as ARM SMMU with HTTU or Intel IOMMU with SLADE. This introduces the dirty log tracking framework in the IOMMU base layer. Three new essential interfaces are added, and we maintaince the status of dirty log tracking in iommu_domain. 1. iommu_switch_dirty_log: Perform actions to start|stop dirty log tracking 2. iommu_sync_dirty_log: Sync dirty log from IOMMU into a dirty bitmap 3. iommu_clear_dirty_log: Clear dirty log of IOMMU by a mask bitmap About SMMU HTTU: HTTU (Hardware Translation Table Update) is a feature of ARM SMMUv3, it can update access flag or/and dirty state of the TTD (Translation Table Descriptor) by hardware. With HTTU, stage1 TTD is classified into 3 types: DBM bit AP[2](readonly bit) 1. writable_clean 1 1 2. writable_dirty 1 0 3. readonly 0 1 If HTTU_HD (manage dirty state) is enabled, smmu can change TTD from writable_clean to writable_dirty. Then software can scan TTD to sync dirty state into dirty bitmap. With this feature, we can track the dirty log of DMA continuously and precisely. About this series: Patch 1-3：Introduce dirty log tracking framework in the IOMMU base layer, and two common interfaces that can be used by many types of iommu. Patch 4-6: Add feature detection for smmu HTTU and enable HTTU for smmu stage1 mapping. And add feature detection for smmu BBML. We need to split block mapping when start dirty log tracking and merge page mapping when stop dirty log tracking, which requires break-before-make procedure. But it might cause problems when the TTD is alive. The I/O streams might not tolerate translation faults. So BBML should be used. Patch 7-12: We implement these interfaces for arm smmuv3. Thanks, Keqian Jean-Philippe Brucker (1): iommu/arm-smmu-v3: Add support for Hardware Translation Table Update Keqian Zhu (1): iommu: Introduce dirty log tracking framework Kunkun Jiang (11): iommu/io-pgtable-arm: Add quirk ARM_HD and ARM_BBMLx iommu/io-pgtable-arm: Add and realize split_block ops iommu/io-pgtable-arm: Add and realize merge_page ops iommu/io-pgtable-arm: Add and realize sync_dirty_log ops iommu/io-pgtable-arm: Add and realize clear_dirty_log ops iommu/arm-smmu-v3: Enable HTTU for stage1 with io-pgtable mapping iommu/arm-smmu-v3: Add feature detection for BBML iommu/arm-smmu-v3: Realize switch_dirty_log iommu ops iommu/arm-smmu-v3: Realize sync_dirty_log iommu ops iommu/arm-smmu-v3: Realize clear_dirty_log iommu ops iommu/arm-smmu-v3: Realize support_dirty_log iommu ops .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 2 + drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 268 +++++++++++- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 14 + drivers/iommu/io-pgtable-arm.c | 389 +++++++++++++++++- drivers/iommu/iommu.c | 206 +++++++++- include/linux/io-pgtable.h | 23 ++ include/linux/iommu.h | 65 +++ include/trace/events/iommu.h | 63 +++ 8 files changed, 1026 insertions(+), 4 deletions(-)