mbox series

[v1,0/3] media: imx: add support for imx8mq MIPI RX

Message ID 20210527075407.3180744-1-martin.kepplinger@puri.sm (mailing list archive)
Headers show
Series media: imx: add support for imx8mq MIPI RX | expand

Message

Martin Kepplinger May 27, 2021, 7:54 a.m. UTC 
This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.

I'll send the sensor driver I'm using (that will use this code via the
imx8mq-librem5 board) later, if that's ok.

Thanks Laurent, who helped a lot. I'm happy for any feedback,

                           martin

Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  |  151 +++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     |  102 ++
 drivers/staging/media/imx/Makefile            |    1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 1023 +++++++++++++++++
 4 files changed, 1277 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c