[v9,0/3] media: imx: add support for imx8mq MIPI RX

Message

Martin Kepplinger July 26, 2021, 8:21 a.m. UTC

hi,

This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
any feedback,

                           martin

revision history
----------------
v9: (thank you Laurent)
* improve getting the esc clock rate for hs_settle

v8: (thank you Laurent)
* calculate hs_settle for any clk rate and mode
* add reviewed-by tag
https://lore.kernel.org/linux-media/[e-mail]/T/

v7: (thank you Laurent and Rob)
* fix the binding example (include the reset driver)
* use pm_runtime_resume_and_get()
* fix some logic in init_cfg()
* add some useful code comments and fix minor bits found by Laurent in v6
https://lore.kernel.org/linux-media/[e-mail]/T/#t

v6: (thank you Laurent and Rob)
* add reviewed-by tag to binding
* statically allocate clk_bulk_data
* fix how the hs_settle value is applied
* remove s_power calls
* remove the link_setup() callback implementation and make the link immutable
* more cleanups according to Laurents' review from v5
https://lore.kernel.org/linux-media/[e-mail]/

v5: (thank you Laurent)
* fix reset usage by using the already supported reset controller driver
* remove clko2 (totally unrelated clock / had been included by accident)
* rename pxl clock to ui
https://lore.kernel.org/linux-media/[e-mail]/

v4: (thank you Rob and Marco)
* create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
* add imx8mq-specific compatibile to imx8mq.dtsi for future use
https://lore.kernel.org/linux-media/[e-mail]/

v3: (thank you, Rob and Laurent)
among minor other things according to v2 review, changes include:
* better describe the clocks
* rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
https://lore.kernel.org/linux-media/[e-mail]/T/#t

v2: (thank you, Dan and Guido)
among fixes according to v1 reviews, changes include:
* remove status property from dt-bindings example
* define a few bits in order to have less magic values
* use "imx8mq_mipi_csi_" as local function prefix
* read DT properties only during probe()
* remove dead code (log_status)
* add imx8mq_mipi_csi_release_icc()
* fix imx8mq_mipi_csi_init_icc()
https://lore.kernel.org/linux-media/[e-mail]/

v1:
https://lore.kernel.org/linux-media/[e-mail]/T/#t


Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 ++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
 drivers/staging/media/imx/Makefile            |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 976 ++++++++++++++++++
 4 files changed, 1255 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

Comments

Laurent Pinchart July 27, 2021, 1 a.m. UTC | #1

Hi Martin,

On Mon, Jul 26, 2021 at 10:21:14AM +0200, Martin Kepplinger wrote:
> hi,
> 
> This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.
> 
> It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
> I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
> any feedback,

No more feedback from me :-) I'll take patches 1/3 and 2/3 in my tree
and send a pull request.

Shawn, could you please review 3/3 ?

> revision history
> ----------------
> v9: (thank you Laurent)
> * improve getting the esc clock rate for hs_settle
> 
> v8: (thank you Laurent)
> * calculate hs_settle for any clk rate and mode
> * add reviewed-by tag
> https://lore.kernel.org/linux-media/[e-mail]/T/
> 
> v7: (thank you Laurent and Rob)
> * fix the binding example (include the reset driver)
> * use pm_runtime_resume_and_get()
> * fix some logic in init_cfg()
> * add some useful code comments and fix minor bits found by Laurent in v6
> https://lore.kernel.org/linux-media/[e-mail]/T/#t
> 
> v6: (thank you Laurent and Rob)
> * add reviewed-by tag to binding
> * statically allocate clk_bulk_data
> * fix how the hs_settle value is applied
> * remove s_power calls
> * remove the link_setup() callback implementation and make the link immutable
> * more cleanups according to Laurents' review from v5
> https://lore.kernel.org/linux-media/[e-mail]/
> 
> v5: (thank you Laurent)
> * fix reset usage by using the already supported reset controller driver
> * remove clko2 (totally unrelated clock / had been included by accident)
> * rename pxl clock to ui
> https://lore.kernel.org/linux-media/[e-mail]/
> 
> v4: (thank you Rob and Marco)
> * create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
> * add imx8mq-specific compatibile to imx8mq.dtsi for future use
> https://lore.kernel.org/linux-media/[e-mail]/
> 
> v3: (thank you, Rob and Laurent)
> among minor other things according to v2 review, changes include:
> * better describe the clocks
> * rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
> https://lore.kernel.org/linux-media/[e-mail]/T/#t
> 
> v2: (thank you, Dan and Guido)
> among fixes according to v1 reviews, changes include:
> * remove status property from dt-bindings example
> * define a few bits in order to have less magic values
> * use "imx8mq_mipi_csi_" as local function prefix
> * read DT properties only during probe()
> * remove dead code (log_status)
> * add imx8mq_mipi_csi_release_icc()
> * fix imx8mq_mipi_csi_init_icc()
> https://lore.kernel.org/linux-media/[e-mail]/
> 
> v1:
> https://lore.kernel.org/linux-media/[e-mail]/T/#t
> 
> 
> Martin Kepplinger (3):
>   dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
>     controller
>   media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
>   arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
> 
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 ++++
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
>  drivers/staging/media/imx/Makefile            |   1 +
>  drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 976 ++++++++++++++++++
>  4 files changed, 1255 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
>  create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

Shawn Guo Aug. 4, 2021, 9:09 a.m. UTC | #2

On Tue, Jul 27, 2021 at 04:00:42AM +0300, Laurent Pinchart wrote:
> Hi Martin,
> 
> On Mon, Jul 26, 2021 at 10:21:14AM +0200, Martin Kepplinger wrote:
> > hi,
> > 
> > This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.
> > 
> > It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
> > I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
> > any feedback,
> 
> No more feedback from me :-) I'll take patches 1/3 and 2/3 in my tree
> and send a pull request.
> 
> Shawn, could you please review 3/3 ?

Yeah, it looks good, and I just picked it up.

Shawn