[v2,0/8] fixes and enablement for rk356x

Message

Peter Geis July 28, 2021, 6 p.m. UTC

Good Morning,

This series aims to fix some early issues with the rk356x and enable
nodes that are currently supported by the available drivers.

1. fixes the mbi-alias, which points to the wrong location
2. fixes the rockchip clk-pll to work without a grf node
3. adds the gpio debounce clocks which are necessary for gpio to bind
4. adds the common gmac1 node
5. adds the tsadc nodes
6. adjusts the gpll and ppll clocks to better support hardware
7. enables the gmac1 on the Quartz64
8. adds thermal support to the Quartz64

Changelog:
v2:
Drop "dt-bindings: gpio: rockchip,gpio-bank: increase max clocks"
Drop "arm64: dts: rockchip: add missing rk3568 cru phandles"
Add clk-pll fix patch as suggested by Heiko
Move ethernet alias to Quartz64 board as suggested by Heiko
Adjust tsadc pinctrl as suggested by Heiko and Johan
Move tsadc mode and polarity to Quartz64 board

Peter Geis (8):
  arm64: dts: rockchip: fix rk3568 mbi-alias
  clk: rockchip: fix clk-pll rk356x early pll init
  arm64: dts: rockchip: add rk356x gpio debounce clocks
  arm64: dts: rockchip: add rk356x gmac1 node
  arm64: dts: rockchip: add rk3568 tsadc nodes
  arm64: dts: rockchip: adjust rk3568 pll clocks
  arm64: dts: rockchip: enable gmac node on quartz64-a
  arm64: dts: rockchip: add thermal support to Quartz64 Model A

 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |  71 ++++++++++
 .../boot/dts/rockchip/rk3568-pinctrl.dtsi     |   7 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 131 +++++++++++++++++-
 drivers/clk/rockchip/clk-pll.c                |   2 +-
 4 files changed, 204 insertions(+), 7 deletions(-)

Comments

Heiko Stuebner July 29, 2021, 1:19 p.m. UTC | #1

On Wed, 28 Jul 2021 14:00:26 -0400, Peter Geis wrote:
> Good Morning,
> 
> This series aims to fix some early issues with the rk356x and enable
> nodes that are currently supported by the available drivers.
> 
> 1. fixes the mbi-alias, which points to the wrong location
> 2. fixes the rockchip clk-pll to work without a grf node
> 3. adds the gpio debounce clocks which are necessary for gpio to bind
> 4. adds the common gmac1 node
> 5. adds the tsadc nodes
> 6. adjusts the gpll and ppll clocks to better support hardware
> 7. enables the gmac1 on the Quartz64
> 8. adds thermal support to the Quartz64
> 
> [...]

Applied the easy ones for now, thanks!

[1/8] arm64: dts: rockchip: fix rk3568 mbi-alias
      commit: 0ecf7b9137e05e2ade45b0555b00248cc0b7ac69
-> just put that in for 5.15, as the rk3568 on 5.14 is
   still largely a wip

[2/8] clk: rockchip: fix clk-pll rk356x early pll init
      commit: 6fffe52fb336ec2063270a7305652a93ea677ca1
-> I've adapted the commit message here

[4/8] arm64: dts: rockchip: add rk356x gmac1 node
      commit: 6cdca5eb64c6eff6d552b475b6dc9182d84f2a31
-> did a bit of sorting here

[6/8] arm64: dts: rockchip: adjust rk3568 pll clocks
      commit: 66a6450203e2e9bcaf6cb5938e7a9a159234722a
-> adapted commit message with your reply from v1

[7/8] arm64: dts: rockchip: enable gmac node on quartz64-a
      commit: 797fc427ffb9a746d985c5f31e9c14defc1d1187

Best regards,

Heiko Stuebner Aug. 18, 2021, 9:25 p.m. UTC | #2

On Wed, 28 Jul 2021 14:00:26 -0400, Peter Geis wrote:
> Good Morning,
> 
> This series aims to fix some early issues with the rk356x and enable
> nodes that are currently supported by the available drivers.
> 
> 1. fixes the mbi-alias, which points to the wrong location
> 2. fixes the rockchip clk-pll to work without a grf node
> 3. adds the gpio debounce clocks which are necessary for gpio to bind
> 4. adds the common gmac1 node
> 5. adds the tsadc nodes
> 6. adjusts the gpll and ppll clocks to better support hardware
> 7. enables the gmac1 on the Quartz64
> 8. adds thermal support to the Quartz64
> 
> [...]

Applied, thanks!

[3/8] arm64: dts: rockchip: add rk356x gpio debounce clocks
      commit: bf092ebe6e81fe7f7b710e749a3debfece193ff5

Best regards,

Heiko Stuebner Aug. 18, 2021, 9:42 p.m. UTC | #3

On Wed, 28 Jul 2021 14:00:26 -0400, Peter Geis wrote:
> Good Morning,
> 
> This series aims to fix some early issues with the rk356x and enable
> nodes that are currently supported by the available drivers.
> 
> 1. fixes the mbi-alias, which points to the wrong location
> 2. fixes the rockchip clk-pll to work without a grf node
> 3. adds the gpio debounce clocks which are necessary for gpio to bind
> 4. adds the common gmac1 node
> 5. adds the tsadc nodes
> 6. adjusts the gpll and ppll clocks to better support hardware
> 7. enables the gmac1 on the Quartz64
> 8. adds thermal support to the Quartz64
> 
> [...]

Applied, thanks!

[5/8] arm64: dts: rockchip: add rk3568 tsadc nodes
      commit: 1a9563ba0a59b221156d80a3a77a43fdd144576c

[I've moved the tsadc-pin pin setting to the second pinctrl
 block meant to hand-crafted pin settings in rk3568-pinctrl.dtsi]


[8/8] arm64: dts: rockchip: add thermal support to Quartz64 Model A
      commit: d0e2e61b3cbaab474e2093ceb2073c4441bd36f8

Looks like we're all done with that series now.

Best regards,