[v5,0/5] enable usb support on rk356x

Message

Peter Geis April 8, 2022, 3:12 p.m. UTC

Good Morning,

This is my patch series that I have maintained out of tree until the
combophy driver landed.

This has been rebased on v5.18-rc1, several patches in the previous
series already landed and have been dropped.

Patch 1 adds the dt bindings for the grf changes necessary.
Patch 2 adds support to the grf driver to set the rk3566 otg clock
source.
Patch 3 adds the dwc3 nodes to the rk356x device tree includes.
Patch 4 enables the dwc3 nodes on the Quartz64 Model A.
Patch 5 enables the dwc3 nodes on the rk3568-evb.

Please review and apply.

Very Respectfully,
Peter Geis

Changelog:
v5:
- Rebase on v5.18-rc1
- Drop patches already merged
- Collect acks and tested-by

v4:
- Add SoC specific binding, fall back to core.
 
v3:
- Drop the dwc-of-simple method in favor of using dwc core.
- Drop all quirks except snps,dis_u2_susphy_quirk, which is necessary to
  prevent device detection failures in some states.
- Drop the reset-names.

v2:
- Add a dt-bindings fix for grf.yaml
- Unify the reset names.
- Constrain the force usb2 clock dwc3 patch to only supported variants of
the ip.
- Change dwc3-of-simple to support of-match-data.
- Drop the PCLK-PIPE clk.
- Rename the usb nodes to be more friendly.
- Add the rk3568-evb enable patch.

Michael Riesch (1):
  arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10

Peter Geis (4):
  dt-bindings: soc: grf: add rk3566-pipe-grf compatible
  soc: rockchip: set dwc3 clock for rk3566
  arm64: dts: rockchip: add rk356x dwc3 usb3 nodes
  arm64: dts: rockchip: enable dwc3 on quartz64-a

 .../devicetree/bindings/soc/rockchip/grf.yaml |  1 +
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      | 11 +++++
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 46 +++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  9 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 35 +++++++++++++-
 drivers/soc/rockchip/grf.c                    | 17 +++++++
 7 files changed, 155 insertions(+), 1 deletion(-)

Comments

Heiko Stuebner April 10, 2022, 5:12 p.m. UTC | #1

On Fri, 8 Apr 2022 11:12:32 -0400, Peter Geis wrote:
> Good Morning,
> 
> This is my patch series that I have maintained out of tree until the
> combophy driver landed.
> 
> This has been rebased on v5.18-rc1, several patches in the previous
> series already landed and have been dropped.
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: soc: grf: add rk3566-pipe-grf compatible
      commit: 2a872dd86eeb349f169df0a204668afa578a94b2
[2/5] soc: rockchip: set dwc3 clock for rk3566
      commit: 5c0bb71138770d85ea840acd379edc6471b867ee
[3/5] arm64: dts: rockchip: add rk356x dwc3 usb3 nodes
      commit: 9f4c480f24e2ce1d464ff9d5f8a249a485acdc7f
[4/5] arm64: dts: rockchip: enable dwc3 on quartz64-a
      commit: e432309ff8bf2a148bbdd4946ca1580c6b5b610c
[5/5] arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10
      commit: d6cfb110b0fdfb4e61ef4e3c3ab89a8f21b4d1b8

Best regards,