mbox series

[v1,0/4] arm: dts: colibri-imx6: usb dual-role switching et. al.

Message ID 20220920092227.286306-1-marcel@ziswiler.com (mailing list archive)
Headers show
Series arm: dts: colibri-imx6: usb dual-role switching et. al. | expand

Message

Marcel Ziswiler Sept. 20, 2022, 9:22 a.m. UTC 
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>


This series is an assortment of USB dual-role specific commits as
follows:

Introduce USBC_DET GPIO based USB dual-role aka device/host switching.

Move USB VBUS supply from single carrier board to module level device
tree. This pin is as per Colibri module family standard.

Specify USBH_PEN GPIO being active-low rather than active-high
(cosmetic only).

Remove spurious debounce property from linux,extcon-usb-gpio. That
commit is actually for Colibri iMX7.


Marcel Ziswiler (3):
  arm: dts: colibri-imx6: move vbus-supply to module level device tree
  arm: dts: colibri-imx6: specify usbh_pen gpio being active-low
  arm: dts: imx7-colibri: remove spurious debounce property

Philippe Schenker (1):
  arm: dts: colibri-imx6: usb dual-role switching

 arch/arm/boot/dts/imx6dl-colibri-aster.dts   |  1 -
 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts |  1 -
 arch/arm/boot/dts/imx6dl-colibri-iris.dts    |  1 -
 arch/arm/boot/dts/imx6qdl-colibri.dtsi       | 22 ++++++++++++++++----
 arch/arm/boot/dts/imx7-colibri.dtsi          |  1 -
 5 files changed, 18 insertions(+), 8 deletions(-)