[v2,00/10] SUNIV USB and PopStick support (and updating mailmap)

Message

Icenowy Zheng Oct. 12, 2022, 5:55 a.m. UTC

This patchset introduces support for F1C100s' USB and SourceParts
PopStick board.

As I switched to a new mail address, and this patchset contains patches
authored before this change, a mailmap update is added.

The DT binding and driver support for SUNIV USB PHY/MUSB are added, in
addition to DT changes to the DTSI and Lichee Nano DT. A new DT is added
for SourceParts PopStick v1.1 board.

Icenowy Zheng (10):
  mailmap: update Icenowy Zheng's mail address
  dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY
  dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string
  phy: sun4i-usb: add support for the USB PHY on F1C100s SoC
  musb: sunxi: add support for the F1C100s MUSB controller
  ARM: suniv: add USB-related device nodes
  ARM: suniv: f1c100s: enable USB on Lichee Pi Nano
  dt-bindings: vendor-prefixes: add Source Parts
  dt-binding: arm: sunxi: add compatible strings for PopStick v1.1
  ARM: dts: suniv: add device tree for PopStick v1.1

 .mailmap                                      |   3 +
 .../devicetree/bindings/arm/sunxi.yaml        |   7 ++
 .../phy/allwinner,suniv-f1c100s-usb-phy.yaml  |  83 ++++++++++++++
 .../usb/allwinner,sun4i-a10-musb.yaml         |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 .../boot/dts/suniv-f1c100s-licheepi-nano.dts  |  16 +++
 arch/arm/boot/dts/suniv-f1c100s.dtsi          |  26 +++++
 .../boot/dts/suniv-f1c200s-popstick-v1.1.dts  | 101 ++++++++++++++++++
 drivers/phy/allwinner/phy-sun4i-usb.c         |  11 ++
 drivers/usb/musb/sunxi.c                      |   8 +-
 11 files changed, 258 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml
 create mode 100644 arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts