mbox series

[0/4] Add UniPhier boards support

Message ID 20221027045157.23325-1-hayashi.kunihiko@socionext.com (mailing list archive)
Headers show
Series Add UniPhier boards support | expand

Message

Kunihiko Hayashi Oct. 27, 2022, 4:51 a.m. UTC 
This series adds support for NX1 SoC, and the boards for Pro5 and NX1 SoCs.
Some of these boards have PCI endpoint.

NX1 SoC follows the same architecture as the other UniPhier SoCs, except
for the memory map.

Kunihiko Hayashi (4):
  dt-bindings: arm: uniphier: Add Pro5 boards
  ARM: dts: uniphier: Add Pro5 board support
  dt-bindings: arm: uniphier: Add NX1 boards
  arm64: dts: uniphier: Add NX1 SoC and boards support

 .../bindings/arm/socionext/uniphier.yaml      |  13 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/uniphier-pro5-epcore.dts    |  76 ++
 arch/arm/boot/dts/uniphier-pro5-proex.dts     |  59 ++
 arch/arm64/boot/dts/socionext/Makefile        |   3 +
 .../boot/dts/socionext/uniphier-nx1-evb.dts   |  83 +++
 .../boot/dts/socionext/uniphier-nx1-ref.dts   | 109 +++
 .../boot/dts/socionext/uniphier-nx1-som.dts   |  50 ++
 .../boot/dts/socionext/uniphier-nx1.dtsi      | 704 ++++++++++++++++++
 9 files changed, 1099 insertions(+)
 create mode 100644 arch/arm/boot/dts/uniphier-pro5-epcore.dts
 create mode 100644 arch/arm/boot/dts/uniphier-pro5-proex.dts
 create mode 100644 arch/arm64/boot/dts/socionext/uniphier-nx1-evb.dts
 create mode 100644 arch/arm64/boot/dts/socionext/uniphier-nx1-ref.dts
 create mode 100644 arch/arm64/boot/dts/socionext/uniphier-nx1-som.dts
 create mode 100644 arch/arm64/boot/dts/socionext/uniphier-nx1.dtsi