mbox series

[0/2] arm64: amlogic: Add initial support for BPI-M2S variants

Message ID 20230305132044.1596320-1-christianshewitt@gmail.com (mailing list archive)
Headers show
Series arm64: amlogic: Add initial support for BPI-M2S variants | expand

Message

Christian Hewitt March 5, 2023, 1:20 p.m. UTC 
Add support for the BananaPi M2S which ships in two board variants with
the Amlogic S922X or A311D chipset. Schematics for the board are not
currently available from Sinovoip so the device-tree is largely derived
from the Khadas VIM3 (also S922X/A311D) and other recent BPI boards that
have public documentation. The device-tree also supports the RTL8822CS
WiFi/BT module. This is optional so the nodes must be enabled though an
overlay or fdtput.

Patches are based on current (v6.3) for-next branch.

Christian Hewitt (2):
  dt-bindings: arm: amlogic: add support for BananaPi M2S variants
  arm64: dts: meson: add support for BananaPi M2S variants

 .../devicetree/bindings/arm/amlogic.yaml      |   2 +
 arch/arm64/boot/dts/amlogic/Makefile          |   2 +
 .../amlogic/meson-g12b-a311d-bananapi-m2s.dts |  37 ++
 .../boot/dts/amlogic/meson-g12b-bananapi.dtsi | 521 ++++++++++++++++++
 .../amlogic/meson-g12b-s922x-bananapi-m2s.dts |  14 +
 5 files changed, 576 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts