[v3,0/5] Add peripherals for J784S4

Message

Jayesh Choudhary April 19, 2023, 6:17 a.m. UTC

This series adds support for:
- SERDES, WIZ DT nodes, Serdes lane control mux
- MAIN CPSW2G nodes
- DSS and DisplayPort-0 nodes

This series depends on DMA support patches for J784S4[1] which are
applied to linux-next.

DisplayPort has been tested on local J784S4 EVM. Test log:
<https://gist.github.com/Jayesh2000/b1465fc170cd97db4f0956770fafbc50>

Changelog v3->v2:
- fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
  (Checked all the changes of the series with W=12 option during build)
- added clock-frequency for serdes_refclk along with other EVM changes
  This refclk is being used by all the instances of serdes_wiz which
  are disabled by default. So configuring refclk when the serdes nodes
  are used for the first time is okay.

Changelog v1->v2:
- Moved J784S4 EVM changes together to the last patch
  (Suggested by Andrew)

v2 patch link:
<https://lore.kernel.org/all/[e-mail]/>

[1]:
<https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=00e34c94987e4fe866f12ad8eac17268c936880c>
<https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=82e6051a48957a89066d15b17bb85d2f662f2bad>
<https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=436b288687176bf4d2c1cd25b86173e5a1649a60>


Rahul T R (2):
  arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
  arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0

Siddharth Vadapalli (3):
  arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane
    mux
  arm64: dts: ti: k3-j784s4: Add Main CPSW2G node
  arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes

 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   | 164 ++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 338 +++++++++++++++++++++
 2 files changed, 502 insertions(+)