| Message ID | 20230602132859.16442-1-alexandre.torgue@foss.st.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add STM32MP25 support | expand |
Hi On 6/2/23 15:28, Alexandre Torgue wrote: > I'm pleased to announce extension of the STM32 MPU family with the addition of > the STM32MP25 Armv8 based SoCs. > > STM32MP25 family is composed of 4 SoCs defined as following: > > -STM32MP251: common part composed of 1*Cortex-A35, common peripherals like > SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display, 1*ETH ... > > -STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD and > LVDS display. > > -STM32MP255: STM32MP253 + GPU/AI and video encode/decode. > -STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports). > > A second diversity layer exists for security features/ A35 frequency: > -STM32MP25xY, "Y" gives information: > -Y = A means A35@1.2GHz + no cryp IP and no secure boot. > -Y = C means A35@1.2GHz + cryp IP and secure boot. > -Y = D means A35@1.5GHz + no cryp IP and no secure boot. > -Y = F means A35@1.5GHz + cryp IP and secure boot. > > This series adds the STM32MP257F EV1 board support. This board embeds a > STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA, > 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ... > > Changes since v1: > > -Add Conor "reviewed-by". > -Drop patch[4] of initial series to not define SoC without board in stm32,yaml. > -Add Krzysztof "Acked-by" after reordering enum in st,stm32-syscon.yaml > > Thanks > Alex > > Alexandre Torgue (9): > dt-bindings: pinctrl: stm32: support for stm32mp257 and additional > packages > pinctrl: stm32: add stm32mp257 pinctrl support > arm64: introduce STM32 family on Armv8 architecture > arm64: dts: st: introduce stm32mp25 SoCs family > arm64: dts: st: introduce stm32mp25 pinctrl files > dt-bindings: stm32: document stm32mp257f-ev1 board > arm64: dts: st: add stm32mp257f-ev1 board support > arm64: defconfig: enable ARCH_STM32 and STM32 serial driver > MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE > > Patrick Delaunay (1): > dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon > Series applied on stm32-next. Regards Alex
I'm pleased to announce extension of the STM32 MPU family with the addition of the STM32MP25 Armv8 based SoCs. STM32MP25 family is composed of 4 SoCs defined as following: -STM32MP251: common part composed of 1*Cortex-A35, common peripherals like SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display, 1*ETH ... -STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD and LVDS display. -STM32MP255: STM32MP253 + GPU/AI and video encode/decode. -STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports). A second diversity layer exists for security features/ A35 frequency: -STM32MP25xY, "Y" gives information: -Y = A means A35@1.2GHz + no cryp IP and no secure boot. -Y = C means A35@1.2GHz + cryp IP and secure boot. -Y = D means A35@1.5GHz + no cryp IP and no secure boot. -Y = F means A35@1.5GHz + cryp IP and secure boot. This series adds the STM32MP257F EV1 board support. This board embeds a STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ... Changes since v1: -Add Conor "reviewed-by". -Drop patch[4] of initial series to not define SoC without board in stm32,yaml. -Add Krzysztof "Acked-by" after reordering enum in st,stm32-syscon.yaml Thanks Alex Alexandre Torgue (9): dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages pinctrl: stm32: add stm32mp257 pinctrl support arm64: introduce STM32 family on Armv8 architecture arm64: dts: st: introduce stm32mp25 SoCs family arm64: dts: st: introduce stm32mp25 pinctrl files dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: add stm32mp257f-ev1 board support arm64: defconfig: enable ARCH_STM32 and STM32 serial driver MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE Patrick Delaunay (1): dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon .../bindings/arm/stm32/st,stm32-syscon.yaml | 7 +- .../devicetree/bindings/arm/stm32/stm32.yaml | 6 + .../bindings/pinctrl/st,stm32-pinctrl.yaml | 4 +- MAINTAINERS | 1 + arch/arm64/Kconfig.platforms | 14 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/st/Makefile | 2 + arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 38 + arch/arm64/boot/dts/st/stm32mp251.dtsi | 279 ++ arch/arm64/boot/dts/st/stm32mp253.dtsi | 23 + arch/arm64/boot/dts/st/stm32mp255.dtsi | 9 + arch/arm64/boot/dts/st/stm32mp257.dtsi | 9 + arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 50 + arch/arm64/boot/dts/st/stm32mp25xc.dtsi | 8 + arch/arm64/boot/dts/st/stm32mp25xf.dtsi | 8 + .../boot/dts/st/stm32mp25xxai-pinctrl.dtsi | 83 + .../boot/dts/st/stm32mp25xxak-pinctrl.dtsi | 71 + .../boot/dts/st/stm32mp25xxal-pinctrl.dtsi | 71 + arch/arm64/configs/defconfig | 3 + drivers/pinctrl/stm32/Kconfig | 6 + drivers/pinctrl/stm32/Makefile | 1 + drivers/pinctrl/stm32/pinctrl-stm32.h | 3 + drivers/pinctrl/stm32/pinctrl-stm32mp257.c | 2581 +++++++++++++++++ include/dt-bindings/pinctrl/stm32-pinfunc.h | 3 + 24 files changed, 3277 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/boot/dts/st/Makefile create mode 100644 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp251.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp253.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp255.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp257.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts create mode 100644 arch/arm64/boot/dts/st/stm32mp25xc.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp25xf.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp257.c