[v3,0/6] Enable decoder for mt8183

Message

Nícolas F. R. A. Prado June 20, 2023, 12:03 a.m. UTC

This series enables the hardware decoder present on mt8183. At first
glance, the only missing piece is the devicetree node for it, however,
simply adding it as is would cause an address collision between the
first register iospace and the clock-controller node, so a rework of the
dt-binding and driver, as well as addition of a new syscon phandle
property, were needed first.

Tested that H264 decoding works with the hardware decoder on
mt8183-kukui-jacuzzi-juniper-sku16, giving a fluster score of 98/135 on
the JVT-AVC_V1 test suite. And ensured other SoCs (MT8192 and MT8195)
still work as usual.

Changes in v3:
- Switched the handling of the VDEC_HW_ACTIVE bit to use a syscon
  instead of the 'active' clock

Changes in v2:
- Merged commit 1 (media: dt-bindings: mediatek,vcodec: Allow single
  clock for mt8183) into commit 3 (media: dt-bindings: mediatek,vcodec:
  Remove VDEC_SYS for mt8183)
- Further constrained properties in dt-binding
- Added CLK_IGNORE_UNUSED flag to active clock
- Reformatted reg-names in DT node

Nícolas F. R. A. Prado (5):
  media: dt-bindings: mediatek,vcodec: Allow single clock for mt8183
  media: dt-bindings: mediatek,vcodec: Don't require assigned-clocks
  media: dt-bindings: mediatek,vcodec: Remove VDEC_SYS for mt8183
  media: mediatek: vcodec: Define address for VDEC_HW_ACTIVE
  media: mediatek: vcodec: Read HW active status from syscon on MT8183

Yunfei Dong (1):
  arm64: dts: mediatek: mt8183: Add decoder

 .../media/mediatek,vcodec-decoder.yaml        | 69 +++++++++++++++---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 30 ++++++++
 .../mediatek/vcodec/mtk_vcodec_dec_drv.c      | 71 ++++++++++++++++---
 .../mediatek/vcodec/mtk_vcodec_dec_hw.c       |  4 +-
 .../mediatek/vcodec/mtk_vcodec_dec_hw.h       |  3 +-
 .../platform/mediatek/vcodec/mtk_vcodec_drv.h |  1 +
 6 files changed, 153 insertions(+), 25 deletions(-)