[v2,0/4] Add support for Allwinner D1 CAN controllers

Message

John Watts July 21, 2023, 10:15 p.m. UTC

This patch series adds support for the Allwinner D1 CAN controllers.
It requires adding a new device tree compatible and driver support to
work around some hardware quirks.

This has been tested on the Mango Pi MQ Dual running a T113 and a Lichee
Panel 86 running a D1.

Changes in v2:
- Re-ordered patches to work with bisecting
- Fixed device tree label underscores
- Fixed email headers

John Watts (4):
  dt-bindings: net: can: Add support for Allwinner D1 CAN controller
  riscv: dts: allwinner: d1: Add CAN controller nodes
  can: sun4i_can: Add acceptance register quirk
  can: sun4i_can: Add support for the Allwinner D1

 .../net/can/allwinner,sun4i-a10-can.yaml      |  6 ++--
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 30 +++++++++++++++++++
 drivers/net/can/Kconfig                       |  4 +--
 drivers/net/can/sun4i_can.c                   | 22 ++++++++++++--
 4 files changed, 55 insertions(+), 7 deletions(-)

Comments

[e-mail] Sept. 1, 2023, 4:25 p.m. UTC | #1

Hello:

This series was applied to riscv/linux.git (fixes)
by Marc Kleine-Budde <[e-mail]>:

On Sat, 22 Jul 2023 08:15:49 +1000 you wrote:
> This patch series adds support for the Allwinner D1 CAN controllers.
> It requires adding a new device tree compatible and driver support to
> work around some hardware quirks.
> 
> This has been tested on the Mango Pi MQ Dual running a T113 and a Lichee
> Panel 86 running a D1.
> 
> [...]

Here is the summary with links:
  - [v2,1/4] dt-bindings: net: can: Add support for Allwinner D1 CAN controller
    (no matching commit)
  - [v2,2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
    https://git.kernel.org/riscv/c/6ea1ad888f59
  - [v2,3/4] can: sun4i_can: Add acceptance register quirk
    (no matching commit)
  - [v2,4/4] can: sun4i_can: Add support for the Allwinner D1
    (no matching commit)

You are awesome, thank you!