| Message ID | 20230814132844.113312-1-dario.binacchi@amarulasolutions.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add display support on the stm32f746-disco board | expand |
Hi Dario On 8/14/23 15:28, Dario Binacchi wrote: > The series adds support for the display on the stm32f746-disco board. > > Changes in v8: > - Add the patch [3/4] "ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco" to > th series. > - Add the 'power-supply' property to panel-rgb node. > - Move backlight and panel-rgb nodes after the vcc-3v3 node. > > Changes in v7: > - Add 'Reviewed-by' tags I forgot in v6. > https://lore.kernel.org/linux-arm-kernel/20230629083726.84910-1-dario.binacchi@amarulasolutions.com/T/ > > Changes in v6: > - Remove dma nodes from stm32f746-disco.dts, they are not used by LTDC, > so there is no need to enable them. > > Changes in v5: > I am confident that framebuffer sizing is a real requirement for STM32 boards, > but I need some time to understand if and how to introduce this functionality. > Therefore, I drop the following patches to allow the series to be fully merged: > - [4/6] dt-bindings: display: stm32-ltdc: add optional st,fb-bpp property > - [5/6] ARM: dts: stm32: set framebuffer bit depth on stm32f746-disco > - [6/6] drm/stm: set framebuffer bit depth through DTS property > > Changes in v4: > - Use DTS property instead of module parameter to set the framebuffer bit depth. > > Changes in v3: > - rename ltdc-pins-a-0 to ltdc-0. > - drop [4/6] dt-bindings: display: simple: add Rocktech RK043FN48H > Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next): > https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c42a37a27c777d63961dd634a30f7c887949491a > - drop [5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel > Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next) > https://cgit.freedesktop.org/drm/drm-misc/commit/?id=13cdd12a9f934158f4ec817cf048fcb4384aa9dc > > Dario Binacchi (4): > ARM: dts: stm32: add ltdc support on stm32f746 MCU > ARM: dts: stm32: add pin map for LTDC on stm32f7 > ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco > ARM: dts: stm32: support display on stm32f746-disco board > > arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++ > arch/arm/boot/dts/st/stm32f746-disco.dts | 50 +++++++++++++++++++++-- > arch/arm/boot/dts/st/stm32f746.dtsi | 10 +++++ > 3 files changed, 92 insertions(+), 3 deletions(-) > Series applied on stm32-next. Thanks!! Alex