mbox series

[v12,0/5] Enable Display for J784S4 and AM69-SK platform

Message ID 20231019054022.175163-1-j-choudhary@ti.com (mailing list archive)
Headers show
Series Enable Display for J784S4 and AM69-SK platform | expand

Message

Jayesh Choudhary Oct. 19, 2023, 5:40 a.m. UTC 
This series adds support for:
- DisplayPort for J784S4-EVM
- Displayport and HDMI for AM69-SK platform

Changelog v11->v12:
- Revert back to port definition as per v9 as W=1 warning in v10 and v11
  was not acceptable. (Suggested by Vignesh)
  [3/5]: Remove '#address-cells' and '#size-cells' from dss_ports as now
  we are back to default single port definition on J784S4-EVM board file
  [4/5]: Revert back to NOT using reg for default port 0 on J784S4-EVM.
  [5/5]: Add #address-cells and #size-cells in dss-ports for AM69-SK as
  they can no longer be kept in main file.
- Pick up R-by tag for the series by Roger in v11.

v11: https://lore.kernel.org/all/20231005132732.7462-1-j-choudhary@ti.com/

Changelog v10->v11:
- Added comment for disabling serdes-refclk (according to comments of v5)
- Update commit message to document why serdes, wiz nodes (2/5) and mhdp-
  bridge, tidss nodes (3/5) are disabled.
- Keep only ports in board files and move common properties to main file
  and document why ports are kept empty.

v10: https://lore.kernel.org/all/20230927121157.278592-1-j-choudhary@ti.com/

Changelog v9->v10:
- Remove duplicate properties from dp0_ports node in main file.
- Add reg for the port even though there is only single port in dss_port
  since its more accurate description for the port.
- Carry the R-by tags from v9.

v9: https://lore.kernel.org/all/20230803080441.367341-1-j-choudhary@ti.com/

Changelog v8->v9:
- Fix compatible of serdes_ln_ctrl node
- Fix extra new lines across nodes
- Fix node-names to keep them generic

v8: https://lore.kernel.org/all/20230801070019.219660-1-j-choudhary@ti.com/

Changelog v7->v8:
- rebase on tag next-20230731
- add AM69 display support
- fix commit heading for patch [2/5]

v7: https://lore.kernel.org/all/20230728050859.7370-1-j-choudhary@ti.com/

Changelog v6->v7:
- change compatible for scm_conf to 'simple-bus'
- drop main_cpsw node due to driver dependency on [1]

v6: https://lore.kernel.org/all/20230721132029.123881-1-j-choudhary@ti.com/

Changelog v5->v6:
- Change header file according to [2].
- Add idle-state property in serdes_ln_ctrl node.
- Fix dtbs_check warning due to clock-frequency property in serdes_refclk
  node by disabling the node in main.dtsi and enabling it in board file
  when the clock-frequency node is actually added.

v5: https://lore.kernel.org/all/20230710101705.154119-1-j-choudhary@ti.com/

Changelog v4->v5:
- rebased the patches on linux-next tip.

v4: https://lore.kernel.org/all/20230425131607.290707-1-j-choudhary@ti.com/

Changelog v3->v4:
- add reg property to serdes_ln_ctrl and fix the node name again to
  get rid of dtbs_check error.
- reorder reg, reg-names and ranges property for main_cpsw1.
- correct the order for clocks in serdes_wiz nodes to fix dtbs_check
  warnings.
- fix indentation in reg, reg-names and clock property for dss node.
- add comments for the reg type in dss registers.

v3: https://lore.kernel.org/all/20230419061710.290068-1-j-choudhary@ti.com/

Changelog v3->v2:
- fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
  (Checked all the changes of the series with W=12 option during build)
- added clock-frequency for serdes_refclk along with other EVM changes
  This refclk is being used by all the instances of serdes_wiz which
  are disabled by default. So configuring refclk when the serdes nodes
  are used for the first time is okay.

v2: https://lore.kernel.org/all/20230414151553.339599-1-j-choudhary@ti.com/

Changelog v1->v2:
- Moved J784S4 EVM changes together to the last patch
  (Suggested by Andrew)

v1: https://lore.kernel.org/all/20230405111412.151192-1-j-choudhary@ti.com/


[0]: <https://lore.kernel.org/all/570903b6-8239-d44a-5fac-71700804cb5d@ti.com/>
[1]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@ti.com/>
[2]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@ti.com/>

Dasnavis Sabiya (1):
  arm64: dts: ti: k3-am69-sk: Add DP and HDMI support

Rahul T R (2):
  arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
  arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0

Siddharth Vadapalli (2):
  arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane
    mux
  arm64: dts: ti: k3-j784s4-main: Add WIZ and SERDES PHY nodes

 arch/arm64/boot/dts/ti/k3-am69-sk.dts      | 232 +++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   | 117 +++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 274 +++++++++++++++++++++
 3 files changed, 623 insertions(+)