[V3,0/2] Add rs485 support to uartps driver

Message

Manikanta Guntupalli Oct. 24, 2023, 2:48 p.m. UTC

Add optional gpio property to uartps node to support rs485.
Add rs485 support to uartps driver.
---
Changes for V2:
Modify optional gpio name to xlnx,phy-ctrl-gpios.
Update commit description.
Add support for RTS, delay_rts_before_send and delay_rts_after_send in RS485 mode.
Changes for V3:
Modify optional gpio name to rts-gpios.
Update commit description.
Move cdns_uart_tx_empty function to avoid prototype statement.
Remove assignment of struct serial_rs485 to port->rs485 as
serial core performs that.
Switch to native RTS in non GPIO case.
Handle rs485 during stop tx.
Remove explicit calls to configure gpio direction and value,
as devm_gpiod_get_optional performs that by using GPIOD_OUT_LOW argument.
Update implementation to support configuration of GPIO/RTS value
based on user configuration of SER_RS485_RTS_ON_SEND and
SER_RS485_RTS_AFTER_SEND. Move implementation to start_tx from handle_tx.

Manikanta Guntupalli (2):
  dt-bindings: Add optional gpio property to uartps node to support
    rs485
  tty: serial: uartps: Add rs485 support to uartps driver

 .../devicetree/bindings/serial/cdns,uart.yaml |   6 +
 drivers/tty/serial/xilinx_uartps.c            | 180 ++++++++++++++++--
 2 files changed, 171 insertions(+), 15 deletions(-)