mbox series

[v1,00/10] Add i2c-mux and eeprom devices for Meta Yosemite 4

Message ID 20231101100609.2516844-1-Delphine_CC_Chiu@wiwynn.com (mailing list archive)
Headers show
Series Add i2c-mux and eeprom devices for Meta Yosemite 4 | expand

Message

Delphine CC Chiu Nov. 1, 2023, 10:05 a.m. UTC 
Changelog:
    - Add gpio and eeprom behind i2c-mux
    - Remove redundant idle-state setting for i2c-mux
    - Enable adc 15, wdt2,spi gpio for yosemite4 use
    - Revise quad mode to dual mode to avoid WP pin influnece the SPI
    - Revise power sensor adm1281 for yosemite4 schematic change
    - Add gpio pca9506 I/O expander for yosemite4 use
    - remove space for adm1272 compatible
    - enable interrupt setting for pca9555
    - add eeprom for yosemite4 medusa board/BSM use
    - remove temperature sensor for yosemite4 schematic change
    - add power sensor for power module reading
    - Revise adc128d818 adc mode for yosemite4 schematic change
    - Revise ina233 for yosemite4 schematic change
    - Remove idle state setting for yosemite4 NIC connection
    - Initialize bmc gpio state

Delphine CC Chiu (10):
  ARM: dts: aspeed: yosemite4: Revise i2c-mux devices
  ARM: dts: aspeed: yosemite4: Enable adc15
  ARM: dts: aspeed: yosemite4: Enable spi-gpio setting
  ARM: dts: aspeed: yosemite4: Enable watchdog2
  ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
  ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic
    change
  ARM: dts: aspeed: yosemite4: Add gpio pca9506
  ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change
  ARM: dts: aspeed: yosemite4: Revise i2c14 and i2c15 schematic change
  ARM: dts: aspeed: yosemite4: Initialize bmc gpio state

 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 1026 +++++++++++++++--
 1 file changed, 949 insertions(+), 77 deletions(-)