[v2,0/4] TQMa8Xx (i.MX8QXP/i.MX8DXP) support

Message

Alexander Stein Dec. 14, 2023, 2:23 p.m. UTC

Hi,

this series adds initial support for the TQ TQMa8Xx series, namely
TQMa8XQP (imx8qxp based) and TQMa8XDP (imx8dxp based).
The device tree is split into generic mba8xx.dtsi and tqma8xx.dtsi which
can be used for both imx8qxp and imx8dxp based hardware.

Changes in v2:
* Rebased to next-20231214
* Add imx8dxp support patch
* Collected Marco's and Conor's R-b
* Added support for TQMa8XDP as well
* Add PWM polarity to PWM consumer
* Add PWM pinctrl settings
* Rename ethphy node names
* Remove obsolete num-cs property for SPI nodes
* Add gpio-line-names for lsio_gpio3
* Add USB host support (usbotg3)
* Add eMMC pinctrl settings for 100 & 200 MHz
* Merged SPI pinctrl groups (SPI lines + CS)
* Enabled USB3 host related driver in defconfig
* Add TODO entries

Alexander Stein (4):
  arm64: dts: imx: add imx8dxp support
  dt-bindings: arm: add TQMa8Xx boards
  arm64: dts: freescale: add initial device tree for TQMa8Xx
  arm64: defconfig: Enable i.MX8QXP device drivers

 .../devicetree/bindings/arm/fsl.yaml          |  16 +
 arch/arm64/boot/dts/freescale/Makefile        |   2 +
 .../dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts |  16 +
 .../boot/dts/freescale/imx8dxp-tqma8xdp.dtsi  |  24 +
 arch/arm64/boot/dts/freescale/imx8dxp.dtsi    |  24 +
 .../dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts |  16 +
 .../boot/dts/freescale/imx8qxp-tqma8xqp.dtsi  |  14 +
 arch/arm64/boot/dts/freescale/mba8xx.dtsi     | 532 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/tqma8xx.dtsi    | 265 +++++++++
 arch/arm64/configs/defconfig                  |   6 +
 10 files changed, 915 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxp.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/mba8xx.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/tqma8xx.dtsi

Comments

Shawn Guo Feb. 1, 2024, 9:47 a.m. UTC | #1

On Thu, Dec 14, 2023 at 03:23:23PM +0100, Alexander Stein wrote:
> Alexander Stein (4):
>   arm64: dts: imx: add imx8dxp support
>   dt-bindings: arm: add TQMa8Xx boards
>   arm64: dts: freescale: add initial device tree for TQMa8Xx
>   arm64: defconfig: Enable i.MX8QXP device drivers

Applied all, thanks!