mbox series

[v3,0/2] Add phyBOARD-Segin-i.MX93 support

Message ID 20240119092835.21462-1-othacehe@gnu.org (mailing list archive)
Headers show
Series Add phyBOARD-Segin-i.MX93 support | expand

Message

Mathieu Othacehe Jan. 19, 2024, 9:28 a.m. UTC 
Hello,

This adds support for the phyBOARD-Segin-i.MX93 board.

Thanks,

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
Changes in v3:
- Update documentation to match PHYTEC naming
- Remove useless properties
- Update pinmux from PHYTEC downstream kernel
Changes in v2: 
- Remove useless line
- Add missing reserved-memory entries

v2: https://lore.kernel.org/linux-devicetree/20240117074911.7425-1-othacehe@gnu.org/

Mathieu Othacehe (2):
  dt-bindings: arm: fsl: Add phyBOARD-Segin-i.MX93
  arm64: dts: imx93: Add phyBOARD-Segin-i.MX93 support

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-phyboard-segin.dts    | 119 ++++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi |  56 +++++++++
 4 files changed, 182 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi