mbox series

[v5,0/3] Add phyBOARD-Segin-i.MX93 support

Message ID 20240124074930.26101-1-othacehe@gnu.org (mailing list archive)
Headers show
Series Add phyBOARD-Segin-i.MX93 support | expand

Message

Mathieu Othacehe Jan. 24, 2024, 7:49 a.m. UTC 
Hello,

This adds support for the phyBOARD-Segin-i.MX93 board.
In this v5, I removed the gpio-line-names that were controversial.

Thanks,

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
Changes in v5:
- Remove the gpio-line-names
- Fix the product URLs
Changes in v4:
- Add gpio-line-names to gpio-vf610 dt-bindings documentation
- Add the heartbeat SoM LED
- Add support for the FEC ethernet port
- Restore the original authors in the copyright
- Add gpio-line-names for the GPIOs on the X16 header
Changes in v3:
- Update documentation to match PHYTEC naming
- Remove useless properties
- Update pinmux from PHYTEC downstream kernel
Changes in v2: 
- Remove useless line
- Add missing reserved-memory entries

v4: https://lore.kernel.org/linux-devicetree/20240122095306.14084-1-othacehe@gnu.org/

Mathieu Othacehe (3):
  dt-bindings: arm: fsl: Add phyBOARD-Segin-i.MX93
  dt-bindings: gpio: gpio-vf610: add gpio-line-names
  arm64: dts: imx93: Add phyBOARD-Segin-i.MX93 support

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/gpio/gpio-vf610.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-phyboard-segin.dts    | 117 ++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi | 126 ++++++++++++++++++
 5 files changed, 252 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi