[v5,0/4] Add Support for Wave5 on TI Devices

Message

Brandon Brnich Feb. 20, 2024, 7:14 p.m. UTC

This series is responsible for adding support for Wave5 driver[0]
across numerous TI K3 platforms.

[0]: https://lore.kernel.org/all/[e-mail]/

Changes since v4:
=================
* Remove clock-names from device tree nodes per Vignesh's request
  - "vcodec" clock-name is defined as macro in driver, but unused
  - no purpose to have it in dt node

Changes since v3:
=================

* Address Andrew's comments
  - remove disabled by default on all platforms
  - reorder addresses in 84s4 to be correctly sorted

Changes since v2:
=================

* Remove reference to k3 as requested
* Rebase on v6.8-rc2 where new bindings are present
* Remove am62a dts entry until hrtimer[1] patch gets merged

[1]: https://patchwork.kernel.org/project/linux-media/patch/[e-mail]/

Changes since v1:
=================

* Remove sram parameters
  - sram-size property not included in bindings. Without this, size
  will default to 0 so no point in specifying until binding is added.
* Remove global CMA pools for each platform
  - This is something that has been added in TI backport of driver
  and does not yet have reliable support in upstream version.
  - Removing for now with intention to add back once 48-bit
  addressing is supported in upstream Wave5 driver.

Brandon Brnich (3):
  arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node
  arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node
  arm64: defconfig: Enable Wave5 Video Encoder/Decoder

Darren Etheridge (1):
  arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node

 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi  |  8 ++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi |  8 ++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 16 ++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi      |  2 ++
 arch/arm64/configs/defconfig               |  1 +
 5 files changed, 35 insertions(+)

Comments

Vignesh Raghavendra Feb. 22, 2024, 1:25 p.m. UTC | #1

Hi Brandon Brnich,

On Tue, 20 Feb 2024 13:14:09 -0600, Brandon Brnich wrote:
> This series is responsible for adding support for Wave5 driver[0]
> across numerous TI K3 platforms.
> 
> [0]: https://lore.kernel.org/all/[e-mail]/
> 
> Changes since v4:
> =================
> * Remove clock-names from device tree nodes per Vignesh's request
>   - "vcodec" clock-name is defined as macro in driver, but unused
>   - no purpose to have it in dt node
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/4] arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node
      commit: 7805623df1ff50e69fa66e91f7305144e9ef5c31
[2/4] arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node
      commit: 8caaf735b9114f77895608acde21a5163b1bf02e
[3/4] arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node
      commit: ab480b8036fde8c1ea628bb1027919bf399468e9

I have applied the following to branch ti-k3-config-next on [1].
Thank you!

[4/4] arm64: defconfig: Enable Wave5 Video Encoder/Decoder
      commit: 02b645583e26f38261711f2a8b36c5db06862527

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh