mbox series

[0/3] Add support for Emcraft Systems NavQ+ kit

Message ID 20240328202320.187596-1-gilles.talis@gmail.com (mailing list archive)
Headers show
Series Add support for Emcraft Systems NavQ+ kit | expand

Message

Gilles Talis March 28, 2024, 8:23 p.m. UTC
Hello

This series adds a device tree file for the Emcraft Systems NavQ+ kit [1]

The first patch adds a new vendor prefix for Emcraft Systems
The second one adds the board to the arm/fsl.yaml DT bindings.
Last patch adds device tree file for the kit.

[1] https://www.emcraft.com/products/1222


Gilles Talis (3):
  dt-bindings: vendor-prefixes: Add Emcraft Systems
  dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit
  arm64: dts: freescale: Add device tree for Emcraft Systems NavQ+ Kit

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../arm64/boot/dts/freescale/imx8mp-navqp.dts | 435 ++++++++++++++++++
 4 files changed, 439 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-navqp.dts


base-commit: 4cece764965020c22cff7665b18a012006359095

Comments

Rob Herring (Arm) March 28, 2024, 9:01 p.m. UTC | #1
On Thu, 28 Mar 2024 16:23:17 -0400, Gilles Talis wrote:
> Hello
> 
> This series adds a device tree file for the Emcraft Systems NavQ+ kit [1]
> 
> The first patch adds a new vendor prefix for Emcraft Systems
> The second one adds the board to the arm/fsl.yaml DT bindings.
> Last patch adds device tree file for the kit.
> 
> [1] https://www.emcraft.com/products/1222
> 
> 
> Gilles Talis (3):
>   dt-bindings: vendor-prefixes: Add Emcraft Systems
>   dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit
>   arm64: dts: freescale: Add device tree for Emcraft Systems NavQ+ Kit
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../arm64/boot/dts/freescale/imx8mp-navqp.dts | 435 ++++++++++++++++++
>  4 files changed, 439 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-navqp.dts
> 
> 
> base-commit: 4cece764965020c22cff7665b18a012006359095
> --
> 2.39.2
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y freescale/imx8mp-navqp.dtb' for 20240328202320.187596-1-gilles.talis@gmail.com:

arch/arm64/boot/dts/freescale/imx8mp-navqp.dtb: pinctrl@30330000: 'pmicirq', 'usdhc2grp-100mhz', 'usdhc2grp-200mhz', 'usdhc2grp-gpio', 'usdhc3grp-100mhz', 'usdhc3grp-200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
arch/arm64/boot/dts/freescale/imx8mp-navqp.dtb: pinctrl@30330000: usdhc2grp-gpio: {'fsl,pins': [[188, 796, 0, 5, 0, 452]], 'phandle': [[51]]} is not of type 'array'
	from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#