mbox series

[v7,0/3] arm64: dts: add i.MX95 and EVK board

Message ID 20240617-imx95-dts-v3-v7-0-488b52e10862@nxp.com (mailing list archive)
Headers show
Series arm64: dts: add i.MX95 and EVK board | expand

Message

Peng Fan (OSS) June 17, 2024, 2:56 a.m. UTC 
Add a minimal i.MX95 dtsi and EVK board dts.
i.MX95 has a M33 running SCMI firmware that supports
pinctrl/power/perf/clock and etc.

imx95-pinfunc.h will trigger checkpatch error, that is expected and same
as other i.MX platforms.

[1] has been merge to https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=for-next

In v6, I added back a dependency on pinctrl, because [1] has got A-b/R-b
from Maintainers, so it would be soon got merged.

There will be dtbs_check error before [1] got landed. With [1] merged,
there will be no dtbs_check error.

[1] https://lore.kernel.org/all/20240521-pinctrl-scmi-imx95-v1-0-9a1175d735fd@nxp.com/

This patchset is just a minimal support for i.MX95. After this patchset
is accepted, a following patchset will include more nodes and features.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
Changes in v7:
- Address Shawn's comment:
  __DT_BINDINGS_IMX95_CLOCK_H ->__IMX95_CLOCK_H
  Drop cpuidle because it is not stable as of now
  clock node name start with clock-xx
  sram unit address match reg
  enable-active-high right after line of gpio
- Address Amit's comments 0x7F000000 -> 0x7f000000
- Rebase to Linux-next next-20240613
- Link to v6: https://lore.kernel.org/r/20240605-imx95-dts-v3-v6-0-2ce275ed0e80@nxp.com

Changes in v6:
- Add pinctrl nodes and pin settings
- Add imx95-pinfunc.h
- Drop fsl,cd-gpio-disable-wakeup which is downstream property
- Per i.MX M33 SCMI firmware, drop unused PERF entries in imx95-power.h
- Rebased to next-20240604
- Link to v5: https://lore.kernel.org/r/20240506-imx95-dts-v3-v5-0-5ec9b99cfb2f@nxp.com

Changes in v5:
- Drop unused regulator and alias for now.
- Fix CHECK_DTB warning.
- Link to v4: https://lore.kernel.org/r/20240503-imx95-dts-v3-v4-0-535ddc2bde73@nxp.com

Changes in v4:
- Sort nodes by address
- Drop coresight nodes
- Align clock rates for SDHC1-3
- Drop wdog3 board specific property
- Link to v3: https://lore.kernel.org/r/20240428-imx95-dts-v3-v3-0-765395f88b9f@nxp.com

Changes in v3:
- Drop irqsteer node because binding not accepted
- Pass dtbs_check
- Link to v2: https://lore.kernel.org/r/20240226-imx95-dts-v2-0-00e36637b07e@nxp.com

Changes in v2:
- Addressed Rob and Krzysztof's comments, and fix dts_check issue
  To pass the dtbs_check, need apply:
  https://lore.kernel.org/all/20240226070910.3379108-1-peng.fan@oss.nxp.com/
  https://lore.kernel.org/all/20240226130243.3820915-1-peng.fan@oss.nxp.com/
  https://lore.kernel.org/all/20240226130516.3821803-1-peng.fan@oss.nxp.com/
  https://lore.kernel.org/all/20240226130826.3824251-1-peng.fan@oss.nxp.com/
  https://lore.kernel.org/all/20240219-imx-mailbox-v8-1-75535a87794e@nxp.com/

- Link to v1: https://lore.kernel.org/r/20240218-imx95-dts-v1-0-2959f89f2018@nxp.com

---
Peng Fan (3):
      dt-bindings: arm: fsl: add i.MX95 19x19 EVK board
      arm64: dts: freescale: add i.MX95 basic dtsi
      arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dts

 Documentation/devicetree/bindings/arm/fsl.yaml    |    6 +
 arch/arm64/boot/dts/freescale/Makefile            |    1 +
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts |  200 ++++
 arch/arm64/boot/dts/freescale/imx95-clock.h       |  187 ++++
 arch/arm64/boot/dts/freescale/imx95-pinfunc.h     |  865 +++++++++++++++++
 arch/arm64/boot/dts/freescale/imx95-power.h       |   47 +
 arch/arm64/boot/dts/freescale/imx95.dtsi          | 1042 +++++++++++++++++++++
 7 files changed, 2348 insertions(+)
---
base-commit: 6906a84c482f098d31486df8dc98cead21cce2d0
change-id: 20240428-imx95-dts-v3-bee59f0e559b

Best regards,

Comments

Shawn Guo June 17, 2024, 3 a.m. UTC | #1 
On Mon, Jun 17, 2024 at 10:56:34AM +0800, Peng Fan (OSS) wrote:
> Peng Fan (3):
>       dt-bindings: arm: fsl: add i.MX95 19x19 EVK board
>       arm64: dts: freescale: add i.MX95 basic dtsi
>       arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dts

Applied all, thanks!