mbox series

[v3,0/4] Add i.MX91 platform support

Message ID 20241120094945.3032663-1-pengfei.li_1@nxp.com (mailing list archive)
Headers show
Series Add i.MX91 platform support | expand

Message

Pengfei Li Nov. 20, 2024, 9:49 a.m. UTC 
The design of the i.MX91 platform is very similar to i.MX93.
The mainly difference between i.MX91 and i.MX93 is as follows:
- i.MX91 removed some clocks and modified the names of some clocks.
- i.MX91 only has one A core
- i.MX91 has different pinmux

Therefore, i.MX91 can reuse i.MX93 dtsi.

---
Change for v3:
- Add Conor's ack on patch #1
- format imx91-11x11-evk.dts with the dt-format tool
- add lpi2c1 node
- link to v2: https://lore.kernel.org/all/20241118051541.2621360-1-pengfei.li_1@nxp.com/

Pengfei Li (4):
  dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
  arm64: dts: freescale: Add i.MX91 dtsi support
  arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
  arm64: defconfig: enable i.MX91 pinctrl

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx91-11x11-evk.dts    | 875 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770 +++++++++++++++
 arch/arm64/boot/dts/freescale/imx91.dtsi      |  70 ++
 arch/arm64/configs/defconfig                  |   1 +
 6 files changed, 1723 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
 create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi