[v13,0/9] PCI: EP: Add RC-to-EP doorbell with platform MSI controller

Message

Frank Li Dec. 18, 2024, 11:08 p.m. UTC

┌────────────┐   ┌───────────────────────────────────┐   ┌────────────────┐
│            │   │                                   │   │                │
│            │   │ PCI Endpoint                      │   │ PCI Host       │
│            │   │                                   │   │                │
│            │◄──┤ 1.platform_msi_domain_alloc_irqs()│   │                │
│            │   │                                   │   │                │
│ MSI        ├──►│ 2.write_msi_msg()                 ├──►├─BAR<n>         │
│ Controller │   │   update doorbell register address│   │                │
│            │   │   for BAR                         │   │                │
│            │   │                                   │   │ 3. Write BAR<n>│
│            │◄──┼───────────────────────────────────┼───┤                │
│            │   │                                   │   │                │
│            ├──►│ 4.Irq Handle                      │   │                │
│            │   │                                   │   │                │
│            │   │                                   │   │                │
└────────────┘   └───────────────────────────────────┘   └────────────────┘

This patches based on old https://lore.kernel.org/imx/[e-mail]/

Original patch only target to vntb driver. But actually it is common
method.

This patches add new API to pci-epf-core, so any EP driver can use it.

Previous v2 discussion here.
https://lore.kernel.org/imx/[e-mail]/

Changes in v13:
- Change to use DOMAIN_BUS_PCI_DEVICE_EP_MSI
- Change request id as  func | vfunc << 3
- Remove IRQ_DOMAIN_MSI_IMMUTABLE

Thomas Gleixner:

I hope capture all your points in review comments. If missed, let me know.

- Link to v12: https://lore.kernel.org/r/[e-mail]

Changes in v12:
- Change to use IRQ_DOMAIN_MSI_IMMUTABLE and add help function
irq_domain_msi_is_immuatble().
- split PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check to 3 patches
- Link to v11: https://lore.kernel.org/r/[e-mail]

Changes in v11:
- Change to use MSI_FLAG_MSG_IMMUTABLE
- Link to v10: https://lore.kernel.org/r/[e-mail]

Changes in v10:

Thomas Gleixner:
	There are big change in pci-ep-msi.c. I am sure if go on the
corrent path. The key improvement is remove only 1 function devices's
limitation.

	I use new patch for imutable check, which relative additional
feature compared to base enablement patch.

- Remove patch Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
- Add new patch irqchip/gic-v3-its: Avoid overwriting msi_prepare callback if provided by msi_domain_info
- Remove only support 1 endpoint function limiation.
- Create one MSI domain for each endpoint function devices.
- Use "msi-map" in pci ep controler node, instead of of msi-parent. first
argument is
	(func_no << 8 | vfunc_no)

- Link to v9: https://lore.kernel.org/r/[e-mail]

Changes in v9
- Add patch platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
- Remove patch PCI: endpoint: Add pci_epc_get_fn() API for customizable filtering
- Remove API pci_epf_align_inbound_addr_lo_hi
- Move doorbell_alloc in to doorbell_enable function.
- Link to v8: https://lore.kernel.org/r/[e-mail]

Changes in v8:
- update helper function name to pci_epf_align_inbound_addr()
- Link to v7: https://lore.kernel.org/r/[e-mail]

Changes in v7:
- Add helper function pci_epf_align_addr();
- Link to v6: https://lore.kernel.org/r/[e-mail]

Changes in v6:
- change doorbell_addr to doorbell_offset
- use round_down()
- add Niklas's test by tag
- rebase to pci/endpoint
- Link to v5: https://lore.kernel.org/r/[e-mail]

Changes in v5:
- Move request_irq to epf test function driver for more flexiable user case
- Add fixed size bar handler
- Some minor improvememtn to see each patches's changelog.
- Link to v4: https://lore.kernel.org/r/[e-mail]

Changes in v4:
- Remove patch genirq/msi: Add cleanup guard define for msi_lock_descs()/msi_unlock_descs()
- Use new method to avoid compatible problem.
  Add new command DOORBELL_ENABLE and DOORBELL_DISABLE.
  pcitest -B send DOORBELL_ENABLE first, EP test function driver try to
remap one of BAR_N (except test register bar) to ITS MSI MMIO space. Old
driver don't support new command, so failure return, not side effect.
  After test, DOORBELL_DISABLE command send out to recover original map, so
pcitest bar test can pass as normal.
- Other detail change see each patches's change log
- Link to v3: https://lore.kernel.org/r/[e-mail]

Change from v2 to v3
- Fixed manivannan's comments
- Move common part to pci-ep-msi.c and pci-ep-msi.h
- rebase to 6.12-rc1
- use RevID to distingiush old version

mkdir /sys/kernel/config/pci_ep/functions/pci_epf_test/func1
echo 16 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/msi_interrupts
echo 0x080c > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/deviceid
echo 0x1957 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/vendorid
echo 1 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/revid
^^^^^^ to enable platform msi support.
ln -s /sys/kernel/config/pci_ep/functions/pci_epf_test/func1 /sys/kernel/config/pci_ep/controllers/4c380000.pcie-ep

- use new device ID, which identify support doorbell to avoid broken
compatility.

    Enable doorbell support only for PCI_DEVICE_ID_IMX8_DB, while other devices
    keep the same behavior as before.

           EP side             RC with old driver      RC with new driver
    PCI_DEVICE_ID_IMX8_DB          no probe              doorbell enabled
    Other device ID             doorbell disabled*       doorbell disabled*

    * Behavior remains unchanged.

Change from v1 to v2
- Add missed patch for endpont/pci-epf-test.c
- Move alloc and free to epc driver from epf.
- Provide general help function for EPC driver to alloc platform msi irq.
- Fixed manivannan's comments.

To: Manivannan Sadhasivam <[e-mail]>
To: Krzysztof Wilczyński <[e-mail]>
To: Kishon Vijay Abraham I <[e-mail]>
To: Bjorn Helgaas <[e-mail]>
To: Arnd Bergmann <[e-mail]>
To: Greg Kroah-Hartman <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]
Cc: Niklas Cassel <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
To: Rafael J. Wysocki <[e-mail]>
To: Thomas Gleixner <[e-mail]>
To: Anup Patel <[e-mail]>
To: Kishon Vijay Abraham I <[e-mail]>
To: Marc Zyngier <[e-mail]>
To: Thomas Gleixner <[e-mail]>
Cc: [e-mail]

Signed-off-by: Frank Li <[e-mail]>
---
Frank Li (9):
      genirq/msi: Provide DOMAIN_BUS_PLATFORM_PCI_EP_MSI
      PCI: EP: Add helper function pci_epf_msi_domain_get_msi_rid()
      irqchip/gic-v3-its: Add helper function its_pmsi_prepare_devid()
      irqchip/gic-v3-its: Add DOMAIN_BUS_DEVICE_PCI_EP_MSI support
      PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
      PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment
      PCI: endpoint: pci-epf-test: Add doorbell test support
      misc: pci_endpoint_test: Add doorbell test case
      tools: PCI: Add 'B' option for test doorbell

 drivers/irqchip/irq-gic-v3-its-msi-parent.c   |  49 ++++++---
 drivers/irqchip/irq-msi-lib.c                 |   4 +
 drivers/irqchip/irq-msi-lib.h                 |   6 ++
 drivers/misc/pci_endpoint_test.c              |  80 +++++++++++++++
 drivers/pci/endpoint/Makefile                 |   2 +-
 drivers/pci/endpoint/functions/pci-epf-test.c | 132 ++++++++++++++++++++++++
 drivers/pci/endpoint/pci-ep-msi.c             | 140 ++++++++++++++++++++++++++
 drivers/pci/endpoint/pci-epf-core.c           |  44 ++++++++
 include/linux/irqdomain_defs.h                |   2 +
 include/linux/pci-ep-msi.h                    |  26 +++++
 include/linux/pci-epf.h                       |  19 ++++
 include/uapi/linux/pcitest.h                  |   1 +
 tools/pci/pcitest.c                           |  16 ++-
 13 files changed, 507 insertions(+), 14 deletions(-)
---
base-commit: fb32deaabac5c9ac8e555fad420113348cea8bc2
change-id: 20241010-ep-msi-8b4cab33b1be

Best regards,
---
Frank Li <[e-mail]>