| Message ID | 20250220084020.628704-1-peter.chen@cixtech.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | arm64: Introduce CIX P1 (SKY1) SoC | expand |
On Thu, 20 Feb 2025 16:40:14 +0800, Peter Chen wrote: > Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC. > Orion O6 is the world's first open source Arm V9 Motherboard built by > Radxa. You could find brief introduction for SoC and related boards at: > https://radxa.com/products/orion/o6#overview > > In this series, we add initial SoC and board support for Kernel building. > Patch 1-2: Add dt-binding doc for CIX and its sky1 SoC > Patch 3: add related maintainter entry > Patch 4-5: add Arm64 build support > Patch 6: add initial dts support for SoC and Orion O6 board > > To run upstream kernel at Orion O6 board, you need to use BIOS > released by Radxa: > https://docs.radxa.com/en/orion/o6/bios/install-bios > > Fugang Duan (1): > arm64: Kconfig: add ARCH_CIX for cix silicons > > Peter Chen (5): > dt-bindings: arm: add CIX P1 (SKY1) SoC > dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd. > MAINTAINERS: Add CIX SoC maintainer entry > arm64: defconfig: Enable CIX SoC > arm64: dts: cix: add initial CIX P1(SKY1) dts support > > .../devicetree/bindings/arm/cix.yaml | 26 ++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > MAINTAINERS | 8 + > arch/arm64/Kconfig.platforms | 6 + > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/cix/Makefile | 2 + > arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 21 ++ > arch/arm64/boot/dts/cix/sky1.dtsi | 264 ++++++++++++++++++ > arch/arm64/configs/defconfig | 1 + > 9 files changed, 331 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/cix.yaml > create mode 100644 arch/arm64/boot/dts/cix/Makefile > create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts > create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi > > -- > 2.25.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/cix/' for 20250220084020.628704-1-peter.chen@cixtech.com: redistributor-stride: size (4) error for type uint64 arch/arm64/boot/dts/cix/sky1-orion-o6.dtb: /: compatible: ['radxa,orion-o6'] is too short from schema $id: http://devicetree.org/schemas/arm/cix.yaml# arch/arm64/boot/dts/cix/sky1-orion-o6.dtb: /: memory@80000000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/memory.yaml# arch/arm64/boot/dts/cix/sky1-orion-o6.dtb: soc@0: uart@040d0000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/cix/sky1-orion-o6.dtb: uart@040d0000: $nodename:0: 'uart@040d0000' does not match '^serial(@.*)?$' from schema $id: http://devicetree.org/schemas/serial/pl011.yaml# arch/arm64/boot/dts/cix/sky1-orion-o6.dtb: interrupt-controller@0e001000: redistributor-stride: 262144 is not a 'uint64' from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml# arch/arm64/boot/dts/cix/sky1-orion-o6.dtb: interrupt-controller@0e001000: 'its@e050000' does not match any of the regexes: '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$', '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#