[v2,0/3] Add support for Actions Semi Owl Ethernet MAC

Message

Cristian Ciocaltea March 15, 2021, 11:29 a.m. UTC

This patch series adds support for the Ethernet MAC found on the Actions
Semi Owl family of SoCs.

For the moment I have only tested the driver on RoseapplePi SBC, which is
based on the S500 SoC variant. It might work on S900 as well, but I cannot
tell for sure since the S900 datasheet I currently have doesn't provide
any information regarding the MAC registers - so I couldn't check the
compatibility with S500.

Similar story for S700: the datasheet I own is incomplete, but it seems
the MAC is advertised with Gigabit capabilities. For that reason most
probably we need to extend the current implementation in order to support
this SoC variant as well.

Please note that for testing the driver it is also necessary to update the
S500 clock subsystem:

https://lore.kernel.org/lkml/[e-mail]/

The DTS changes for the S500 SBCs will be provided separately.

Thanks,
Cristi

Changes in v2:
* According to Philipp's review
 - Requested exclusive control over serial line via
   devm_reset_control_get_exclusive()
 - Optimized error handling by using dev_err_probe()

* According to Andrew's review
 - Dropped the inline keywords
 - Applied Reverse Christmas Tree format to local variable declarations
 - Renamed owl_emac_phy_config() to owl_emac_update_link_state()
 - Documented the purpose of the special descriptor used in the context of
   owl_emac_setup_frame_xmit()
 - Updated comment inside owl_emac_mdio_clock_enable() regarding the MDC
   clock divider setup
 - Indicated MAC support for symmetric pause via phy_set_sym_pause()
   in owl_emac_phy_init()
 - Changed the MAC addr generation algorithm in owl_emac_generate_mac_addr()
   by setting the locally administered bit in byte 0 and replacing bytes 1 & 2
   with additional entries from enc_sn
 - Moved devm_add_action_or_reset() before clk_set_rate() in owl_emac_probe()

* Other
 - Added SMII interface support: updated owl_emac_core_sw_reset(), added
   owl_emac_clk_set_rate(), updated description in the YAML binding
 - Changed OWL_EMAC_TX_TIMEOUT from 0.05*HZ to 2*HZ
 - Rebased patchset on v5.12-rc3

Cristian Ciocaltea (3):
  dt-bindings: net: Add Actions Semi Owl Ethernet MAC binding
  net: ethernet: actions: Add Actions Semi Owl Ethernet MAC driver
  MAINTAINERS: Add entries for Actions Semi Owl Ethernet MAC

 .../bindings/net/actions,owl-emac.yaml        |   92 +
 MAINTAINERS                                   |    2 +
 drivers/net/ethernet/Kconfig                  |    1 +
 drivers/net/ethernet/Makefile                 |    1 +
 drivers/net/ethernet/actions/Kconfig          |   39 +
 drivers/net/ethernet/actions/Makefile         |    6 +
 drivers/net/ethernet/actions/owl-emac.c       | 1703 +++++++++++++++++
 drivers/net/ethernet/actions/owl-emac.h       |  280 +++
 8 files changed, 2124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/actions,owl-emac.yaml
 create mode 100644 drivers/net/ethernet/actions/Kconfig
 create mode 100644 drivers/net/ethernet/actions/Makefile
 create mode 100644 drivers/net/ethernet/actions/owl-emac.c
 create mode 100644 drivers/net/ethernet/actions/owl-emac.h