mbox series

[v4,0/3] drm/panel: Add Ronbo RB070D30

Message ID cover.5ac8e6ed5381ceb14a2e5d64671228f665a08d43.1550650810.git-series.maxime.ripard@bootlin.com (mailing list archive)
Headers show
Series drm/panel: Add Ronbo RB070D30 | expand

Message

Maxime Ripard Feb. 20, 2019, 8:21 a.m. UTC 
Hi,

Here is a series adding a driver for the Ronbo RB070D30 panel. This was
previously integrated in the DSI burst series, but those parts have been
merged since.

It's been tested on an Allwinner A33 board.

Let me know what you think,
Maxime

Changes from v3:
  - Added patches for the DT binding and vendor documentation
  - Addressed the comments from Sam and Paul
  - Dropped the merged patches
  - Fixed error in Ronbo panel error path

Changes from v2:
  - Change the start delay calculation according to the legacy driver in
    Allwinner's BSP
  - Fixed the edge calculation to add the same parentheses around the
    factors
  - Added a bunch of fixes to timings
  - Added a patch to make hblk computation more accurate, and added a
    comment
  - Renamed the panel to Ronbo and fixed a bunch of things
  - Added the Reviewed-By

Konstantin Sudakov (2):
  dt-bindings: Add vendor prefix for Ronbo Electronics
  drm/panel: Add Ronbo RB070D30 panel

Maxime Ripard (1):
  dt-bindings: panel: Add YAML schemas for the Ronbo RB070D30 panel

 Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml |  52 +++++++++++++++-
 Documentation/devicetree/bindings/vendor-prefixes.txt               |   1 +-
 drivers/gpu/drm/panel/Kconfig                                       |   9 +++-
 drivers/gpu/drm/panel/Makefile                                      |   1 +-
 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c                        | 258 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 5 files changed, 321 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c

base-commit: b68999315c0cea0f71efae4adbc3508abc9f0f9c

Comments

Maxime Ripard Feb. 26, 2019, 3:47 p.m. UTC | #1 
On Wed, Feb 20, 2019 at 09:21:53AM +0100, Maxime Ripard wrote:
> Hi,
> 
> Here is a series adding a driver for the Ronbo RB070D30 panel. This was
> previously integrated in the DSI burst series, but those parts have been
> merged since.
> 
> It's been tested on an Allwinner A33 board.
> 
> Let me know what you think,
> Maxime

Applied with the order fixup suggested by Paul on patch 1.

Maxime