Show patches with: Submitter = Oleksij Rempel       |    State = Action Required       |   561 patches
« 1 2 3 4 … 5 6 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v1,5/8] ARM: dts: imx6qdl-vicut1/vicutgo: The sgtl5000 uses i2s not ac97 [v1,1/8] ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximum - - - --- 2022-02-21 Oleksij Rempel New
[v1,4/8] ARM: dts: imx6qdl-vicut1: update gpio-line-names for some GPIOs [v1,1/8] ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximum - - - --- 2022-02-21 Oleksij Rempel New
[v1,3/8] ARM: dts: imx6qdl-vicut1/vicutgo: Add backlight_led node [v1,1/8] ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximum - - - --- 2022-02-21 Oleksij Rempel New
[v1,2/8] ARM: dts: imx6qdl-vicut1/vicutgo: Rename backlight to backlight_lcd [v1,1/8] ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximum - - - --- 2022-02-21 Oleksij Rempel New
[v1,1/8] ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximum [v1,1/8] ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximum - - - --- 2022-02-21 Oleksij Rempel New
[v5,9/9] arm64: dts: imx8mm-kontron: fix ethernet node name document dt-schema and fix node names for some USB Ethernet controllers 1 - - --- 2022-02-16 Oleksij Rempel New
[v5,8/9] ARM: dts: tegra20/30: fix ethernet node name for different tegra boards document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-16 Oleksij Rempel New
[v5,7/9] ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-16 Oleksij Rempel New
[v5,6/9] ARM: dts: exynos: fix compatible strings for Ethernet USB devices document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-16 Oleksij Rempel New
[v5,5/9] ARM: dts: exynos: fix ethernet node name for different odroid boards document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-16 Oleksij Rempel New
[v5,4/9] ARM: dts: bcm283x: fix ethernet node name document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-16 Oleksij Rempel New
[v5,3/9] dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller document dt-schema and fix node names for some USB Ethernet controllers 1 - - --- 2022-02-16 Oleksij Rempel New
[v5,2/9] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-16 Oleksij Rempel New
[v5,1/9] dt-bindings: net: add schema for ASIX USB Ethernet controllers document dt-schema and fix node names for some USB Ethernet controllers - 1 - --- 2022-02-16 Oleksij Rempel New
[v4,8/8] arm64: dts: imx8mm-kontron: fix ethernet node name document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v4,7/8] ARM: dts: tegra20/30: fix ethernet node name for different tegra boards document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v4,6/8] ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v4,5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v4,4/8] ARM: dts: bcm283x: fix ethernet node name document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v4,3/8] dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v4,2/8] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v4,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers document dt-schema and fix node names for some USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,8/8] arm64: dts: imx8mm-kontron: fix ethernet node name [v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,7/8] ARM: dts: tegra20/30: fix ethernet node name for different tegra boards [v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,6/8] ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards [v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards [v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,4/8] ARM: dts: bcm283x: fix ethernet node name [v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,3/8] dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller [v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,2/8] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers [v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers [v3,1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers - - - --- 2022-02-15 Oleksij Rempel New
[v3,5/5] ARM: dts: imx6dl: plym2m, prtvt7, victgo: add thermal zones and hwmon ARM: dts: protonic maintenance patches - - - --- 2022-02-11 Oleksij Rempel New
[v3,4/5] ARM: dts: imx6dl: plym2m, prtvt7, victgo: make use of new resistive-adc-touch driver ARM: dts: protonic maintenance patches - - - --- 2022-02-11 Oleksij Rempel New
[v3,3/5] ARM: dts: imx6qdl-vicut1: add CAN termination support ARM: dts: protonic maintenance patches - - - --- 2022-02-11 Oleksij Rempel New
[v3,2/5] ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder node ARM: dts: protonic maintenance patches - - - --- 2022-02-11 Oleksij Rempel New
[v3,1/5] ARM: dts: imx6dl-prtvt7: Add display and panel nodes ARM: dts: protonic maintenance patches - - - --- 2022-02-11 Oleksij Rempel New
[v2,5/5] ARM: dts: imx6dl: plym2m, prtvt7, victgo: add thermal zones and hwmon ARM: dts: protonic maintenance patches - - - --- 2022-01-31 Oleksij Rempel New
[v2,4/5] ARM: dts: imx6dl: plym2m, prtvt7, victgo: make use of new resistive-adc-touch driver ARM: dts: protonic maintenance patches - - - --- 2022-01-31 Oleksij Rempel New
[v2,3/5] ARM: dts: imx6qdl-vicut1: add CAN termination support ARM: dts: protonic maintenance patches - - - --- 2022-01-31 Oleksij Rempel New
[v2,2/5] ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder node ARM: dts: protonic maintenance patches - - - --- 2022-01-31 Oleksij Rempel New
[v2,1/5] ARM: dts: imx6dl-prtvt7: Add display and panel nodes ARM: dts: protonic maintenance patches - - - --- 2022-01-31 Oleksij Rempel New
[v1,4/4] ARM: dts: imx6dl: plym2m, prtvt7, victgo: make use of new resistive-adc-touch driver [v1,1/4] ARM: dts: imx6dl-prtvt7: Add display and panel nodes - - - --- 2021-11-22 Oleksij Rempel New
[v1,3/4] ARM: dts: imx6qdl-vicut1: add CAN termination support [v1,1/4] ARM: dts: imx6dl-prtvt7: Add display and panel nodes - - - --- 2021-11-22 Oleksij Rempel New
[v1,2/4] ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder node [v1,1/4] ARM: dts: imx6dl-prtvt7: Add display and panel nodes - - - --- 2021-11-22 Oleksij Rempel New
[v1,1/4] ARM: dts: imx6dl-prtvt7: Add display and panel nodes [v1,1/4] ARM: dts: imx6dl-prtvt7: Add display and panel nodes - - - --- 2021-11-22 Oleksij Rempel New
[v2,3/3] ARM: dts: add JOZ Access Point [v2,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV - - - --- 2021-11-22 Oleksij Rempel New
[v2,2/3] dt-bindings: arm: fsl: add JOZ Access Point [v2,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV 1 - - --- 2021-11-22 Oleksij Rempel New
[v2,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV [v2,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV 1 - - --- 2021-11-22 Oleksij Rempel New
[v3] thermal: imx: implement runtime PM support [v3] thermal: imx: implement runtime PM support - - 1 --- 2021-11-17 Oleksij Rempel New
[v1] ARM: at91: add Microchip EVB-KSZ9477 board [v1] ARM: at91: add Microchip EVB-KSZ9477 board 1 - - --- 2021-11-11 Oleksij Rempel New
[v2] thermal: imx: implement runtime PM support [v2] thermal: imx: implement runtime PM support - - - --- 2021-10-19 Oleksij Rempel New
[v1,3/3] ARM: dts: add JOZ Access Point [v1,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV - - - --- 2021-10-14 Oleksij Rempel New
[v1,2/3] dt-bindings: arm: fsl: add JOZ Access Point [v1,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV 1 - - --- 2021-10-14 Oleksij Rempel New
[v1,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV [v1,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV 1 - - --- 2021-10-14 Oleksij Rempel New
[v1] ARM: dts: imx6: skov: provide panel support for lt2 variants [v1] ARM: dts: imx6: skov: provide panel support for lt2 variants - - - --- 2021-09-30 Oleksij Rempel New
[v3] ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence [v3] ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence - - - --- 2021-09-28 Oleksij Rempel New
[v1,1/1] thermal: imx: implement runtime PM support [v1,1/1] thermal: imx: implement runtime PM support - - - --- 2021-09-24 Oleksij Rempel New
[v2] ARM: imx6: mask all interrupts before calling stby-poweroff sequence [v2] ARM: imx6: mask all interrupts before calling stby-poweroff sequence - - - --- 2021-08-17 Oleksij Rempel New
[v1] ARM: imx6: mask all interrupts before calling stby-poweroff sequence [v1] ARM: imx6: mask all interrupts before calling stby-poweroff sequence - - - --- 2021-08-17 Oleksij Rempel New
[v1] ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz [v1] ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz - - - --- 2021-08-11 Oleksij Rempel New
[v1] dt-bindings: timer: fsl, imxgpt: add optional osc_per clock [v1] dt-bindings: timer: fsl, imxgpt: add optional osc_per clock - - - --- 2021-08-03 Oleksij Rempel New
[net-next,v1,1/1] net: selftests: add MTU test [net-next,v1,1/1] net: selftests: add MTU test - - - --- 2021-07-22 Oleksij Rempel New
[v2] ASoC: dt-bindings: Convert imx-audmux binding to json schema [v2] ASoC: dt-bindings: Convert imx-audmux binding to json schema - 1 - --- 2021-05-31 Oleksij Rempel New
[v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema [v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema - 1 - --- 2021-05-21 Oleksij Rempel New
[v1,9/9] ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,8/9] ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97 ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,7/9] ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,6/9] ARM: dts: imx6dl-prtvt7: Enable the VPU ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,5/9] ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,4/9] ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,3/9] ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node. ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,2/9] ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,1/9] ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node ARM: dts: fixes for Protonic boards - - - --- 2021-05-18 Oleksij Rempel New
[v1,3/3] ARM: dts: imx6dl-prtvt7: Add display and panel nodes add innolux, g070y2-t02 support for the Protonic VT7 board - - - --- 2021-05-18 Oleksij Rempel New
[v1,2/3] drm: panel-simple: Add support for the Innolux G070Y2-T02 panel add innolux, g070y2-t02 support for the Protonic VT7 board - - - --- 2021-05-18 Oleksij Rempel New
[v1,1/3] dt-bindings: display: simple: add Innolux G070Y2-T02 panel add innolux, g070y2-t02 support for the Protonic VT7 board 1 - - --- 2021-05-18 Oleksij Rempel New
[v3,7/7] ARM: imx7d: remove Atheros AR8031 PHY fixup remove different PHY fixups - 1 - --- 2021-05-11 Oleksij Rempel New
[v3,6/7] ARM: imx6sx: remove Atheros AR8031 PHY fixup remove different PHY fixups - 1 - --- 2021-05-11 Oleksij Rempel New
[v3,5/7] ARM i.MX6q: remove Atheros AR8035 SmartEEE fixup remove different PHY fixups - 1 - --- 2021-05-11 Oleksij Rempel New
[v3,4/7] ARM i.MX6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs remove different PHY fixups - 1 - --- 2021-05-11 Oleksij Rempel New
[v3,3/7] ARM i.MX6q: remove BMCR_PDOWN handler in ar8035_phy_fixup() remove different PHY fixups - 1 - --- 2021-05-11 Oleksij Rempel New
[v3,2/7] ARM i.MX6q: remove part of ar8031_phy_fixup() remove different PHY fixups - 1 - --- 2021-05-11 Oleksij Rempel New
[v3,1/7] ARM i.MX6q: remove PHY fixup for KSZ9031 remove different PHY fixups - 1 - --- 2021-05-11 Oleksij Rempel New
[v3,2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value remove different PHY fixups - dts part - 1 - --- 2021-05-11 Oleksij Rempel New
[v3,1/2] ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID remove different PHY fixups - dts part - 1 - --- 2021-05-11 Oleksij Rempel New
[net-next,v1,1/1] net: selftest: provide option to disable generic selftests [net-next,v1,1/1] net: selftest: provide option to disable generic selftests - - - --- 2021-04-30 Oleksij Rempel New
[net-next,v1,1/1] net: selftest: fix build issue if INET is disabled [net-next,v1,1/1] net: selftest: fix build issue if INET is disabled 1 1 - --- 2021-04-28 Oleksij Rempel New
[net-next,v3,6/6] net: dsa: enable selftest support for all switches by default provide generic net selftest support - - - --- 2021-04-19 Oleksij Rempel New
[net-next,v3,5/6] net: ag71xx: make use of generic NET_SELFTESTS library provide generic net selftest support - - - --- 2021-04-19 Oleksij Rempel New
[net-next,v3,4/6] net: fec: make use of generic NET_SELFTESTS library provide generic net selftest support - - - --- 2021-04-19 Oleksij Rempel New
[net-next,v3,3/6] net: add generic selftest support provide generic net selftest support - - - --- 2021-04-19 Oleksij Rempel New
[net-next,v3,2/6] net: phy: genphy_loopback: add link speed configuration provide generic net selftest support - - - --- 2021-04-19 Oleksij Rempel New
[net-next,v3,1/6] net: phy: execute genphy_loopback() per default on all PHYs provide generic net selftest support - - - --- 2021-04-19 Oleksij Rempel New
[v2,7/7] net: dsa: enable selftest support for all switches by default provide generic net selftest support - - - --- 2021-04-15 Oleksij Rempel New
[v2,6/7] net: ag71xx: make use of generic NET_SELFTESTS library provide generic net selftest support - - - --- 2021-04-15 Oleksij Rempel New
[v2,5/7] net: fec: make use of generic NET_SELFTESTS library provide generic net selftest support - - - --- 2021-04-15 Oleksij Rempel New
[v2,4/7] net: add generic selftest support provide generic net selftest support - - - --- 2021-04-15 Oleksij Rempel New
[v2,3/7] net: phy: at803x: AR8085 & AR9331: add loopback support provide generic net selftest support - - - --- 2021-04-15 Oleksij Rempel New
[v2,2/7] net: phy: micrel: KSZ8081 & KSZ9031: add loopback support provide generic net selftest support - - - --- 2021-04-15 Oleksij Rempel New
[v2,1/7] net: phy: genphy_loopback: add link speed configuration provide generic net selftest support - - - --- 2021-04-15 Oleksij Rempel New
[net-next,v1,3/3] net: fec: add basic selftest support provide basic selftest support for the ethernet FEC driver - - - --- 2021-03-30 Oleksij Rempel New
« 1 2 3 4 … 5 6 »