Show patches with: Submitter = Alexandre Belloni       |    State = Action Required       |   364 patches
« 1 2 3 4 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,2/9] clocksource/drivers/tcb_clksrc: stop depending on atmel_tclib clocksource: improve Atmel TCB timer driver - - - --- 2019-04-15 Alexandre Belloni New
[v2,1/9] ARM: at91: move SoC specific definitions to SoC folder clocksource: improve Atmel TCB timer driver 2 - - --- 2019-04-15 Alexandre Belloni New
[v2] watchdog: pnx4008: readout watchdog state [v2] watchdog: pnx4008: readout watchdog state - 1 1 --- 2019-04-11 Alexandre Belloni New
watchdog: pnx4008: readout watchddog state watchdog: pnx4008: readout watchddog state - - - --- 2019-04-11 Alexandre Belloni New
[v2,3/3] ARM: dts: lpc32xx: add GPIO interrupts Untitled series #103613 - - - --- 2019-04-10 Alexandre Belloni New
[3/3] ARM: dts: lpc32xx: add GPIO interrupts gpio: lpc32xx: enable interrupts for port 3 - - - --- 2019-04-10 Alexandre Belloni New
[2/3] gpio: lpc32xx: enable interrupt lookup for port 3 gpio: lpc32xx: enable interrupts for port 3 - - - --- 2019-04-10 Alexandre Belloni New
[1/3] dt-bindings: gpio: lpc32xx: document interrupt bindings gpio: lpc32xx: enable interrupts for port 3 - - - --- 2019-04-10 Alexandre Belloni New
ARM: dts: at91sam9261ek: remove unused chosen nodes ARM: dts: at91sam9261ek: remove unused chosen nodes - - - --- 2019-04-08 Alexandre Belloni New
[4/4] ARM: dts: at91-vinco: use SPDX-License-Identifier [1/4] ARM: dts: sama5d{2,4}: use SPDX-License-Identifier - - - --- 2019-04-03 Alexandre Belloni New
[3/4] ARM: dts: atmel boards: use SPDX-License-Identifier [1/4] ARM: dts: sama5d{2,4}: use SPDX-License-Identifier - - - --- 2019-04-03 Alexandre Belloni New
[2/4] ARM: dts: at91sam9xe: use SPDX-License-Identifier [1/4] ARM: dts: sama5d{2,4}: use SPDX-License-Identifier - - - --- 2019-04-03 Alexandre Belloni New
[1/4] ARM: dts: sama5d{2,4}: use SPDX-License-Identifier [1/4] ARM: dts: sama5d{2,4}: use SPDX-License-Identifier 1 - - --- 2019-04-03 Alexandre Belloni New
[12/12] clocksource/drivers/timer-atmel-tcb: Use ARRAY_SIZE instead of hardcoded size clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[11/12] misc: atmel_tclib: do not probe already used TCBs clocksource: improve Atmel TCB timer driver 1 - - --- 2019-04-03 Alexandre Belloni New
[10/12] ARM: configs: at91: unselect PIT clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[09/12] clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[08/12] clocksource/drivers/timer-atmel-pit: rework Kconfig option clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[07/12] clocksource/drivers/tcb_clksrc: move Kconfig option clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[06/12] ARM: at91: Implement clocksource selection clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[05/12] clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[04/12] clocksource/drivers/tcb_clksrc: stop depending on atmel_tclib clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[03/12] misc: atmel_tclib: move definitions to header file clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[02/12] misc: atmel_tclib: drop AVR32 support clocksource: improve Atmel TCB timer driver - - - --- 2019-04-03 Alexandre Belloni New
[01/12] ARM: at91: move SoC specific definitions to SoC folder clocksource: improve Atmel TCB timer driver 2 - - --- 2019-04-03 Alexandre Belloni New
[v3,7/7] clk: at91: add sam9x60 pmc driver clk: at91: add sam9x60 pmc clock support - - - --- 2019-04-02 Alexandre Belloni New
[v3,6/7] dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 pmc clock support - - - --- 2019-04-02 Alexandre Belloni New
[v3,5/7] clk: at91: add sam9x60 PLL driver clk: at91: add sam9x60 pmc clock support - - - --- 2019-04-02 Alexandre Belloni New
[v3,4/7] clk: at91: master: Add sam9x60 support clk: at91: add sam9x60 pmc clock support - - - --- 2019-04-02 Alexandre Belloni New
[v3,3/7] clk: at91: usb: Add sam9x60 support clk: at91: add sam9x60 pmc clock support - - - --- 2019-04-02 Alexandre Belloni New
[v3,2/7] clk: at91: allow configuring generated PCR layout clk: at91: add sam9x60 pmc clock support - - - --- 2019-04-02 Alexandre Belloni New
[v3,1/7] clk: at91: allow configuring peripheral PCR layout clk: at91: add sam9x60 pmc clock support - - - --- 2019-04-02 Alexandre Belloni New
[v2,10/10] clk: at91: add sam9x60 pmc driver [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,09/10] dt-bindings: clk: at91: add bindings for SAM9X60 pmc [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,08/10] clk: at91: add sam9x60 PLL driver [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,07/10] clk: at91: master: Add sam9x60 support [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,06/10] clk: at91: usb: Add sam9x60 support [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,05/10] clk: at91: allow configuring generated PCR layout [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,04/10] clk: at91: allow configuring peripheral PCR layout [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,03/10] dt-bindings: clk: at91: add bindings for SAM9X60's slow clock controller [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,02/10] clk: at91: sckc: add support for SAM9X60 [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[v2,01/10] clk: at91: sckc: add support to specify registers bit offsets [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets - - - --- 2019-04-02 Alexandre Belloni New
[3/3] rtc: sh: set range [1/3] rtc: sh: stop resetting time to epoch - 1 - --- 2019-03-20 Alexandre Belloni New
[2/3] rtc: sh: fix possible race condition [1/3] rtc: sh: stop resetting time to epoch - 1 1 --- 2019-03-20 Alexandre Belloni New
[1/3] rtc: sh: stop resetting time to epoch [1/3] rtc: sh: stop resetting time to epoch - 1 1 --- 2019-03-20 Alexandre Belloni New
rtc: omap: let the core handle range rtc: omap: let the core handle range - 1 1 --- 2019-03-18 Alexandre Belloni New
rtc: omap: let the core handle range rtc: omap: let the core handle range - - - --- 2019-03-18 Alexandre Belloni New
[2/3] rtc: mv: convert to devm_rtc_allocate_device Untitled series #92189 - - - --- 2019-03-15 Alexandre Belloni New
[1/3] rtc: mv: convert to SPDX identifier [1/3] rtc: mv: convert to SPDX identifier - - - --- 2019-03-15 Alexandre Belloni New
[3/3] rtc: mv: add range [1/3] rtc: mv: convert to SPDX identifier - - 1 --- 2019-03-15 Alexandre Belloni New
[2/3] rtc: mv: convert to devm_rtc_allocate_device [1/3] rtc: mv: convert to SPDX identifier - - 1 --- 2019-03-15 Alexandre Belloni New
[1/3] rtc: mv: convert to SPDX identifier [1/3] rtc: mv: convert to SPDX identifier - 1 - --- 2019-03-15 Alexandre Belloni New
clk: at91: fix programmable clock for sama5d2 clk: at91: fix programmable clock for sama5d2 - - - --- 2019-02-25 Alexandre Belloni New
[7/7] clk: at91: add sam9x60 pmc driver clk: at91: add sam9x60 pmc clock support - - - --- 2019-02-20 Alexandre Belloni New
[6/7] dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 pmc clock support - 1 - --- 2019-02-20 Alexandre Belloni New
[5/7] clk: at91: add sam9x60 PLL driver clk: at91: add sam9x60 pmc clock support - - - --- 2019-02-20 Alexandre Belloni New
[4/7] clk: at91: master: Add sam9x60 support clk: at91: add sam9x60 pmc clock support - - - --- 2019-02-20 Alexandre Belloni New
[3/7] clk: at91: usb: Add sam9x60 support clk: at91: add sam9x60 pmc clock support - - - --- 2019-02-20 Alexandre Belloni New
[2/7] clk: at91: allow configuring generated PCR layout clk: at91: add sam9x60 pmc clock support - - - --- 2019-02-20 Alexandre Belloni New
[1/7] clk: at91: allow configuring peripheral PCR layout clk: at91: add sam9x60 pmc clock support - - - --- 2019-02-20 Alexandre Belloni New
[7/7] ARM: dts: at91: sama5d3: switch to new sckc bindings clk: at91: rework sckc bindings - - - --- 2019-02-19 Alexandre Belloni New
[6/7] ARM: dts: at91: at91sam9rl: switch to new sckc bindings clk: at91: rework sckc bindings - - - --- 2019-02-19 Alexandre Belloni New
[5/7] ARM: dts: at91: at91sam9g45: switch to new sckc bindings clk: at91: rework sckc bindings - - - --- 2019-02-19 Alexandre Belloni New
[4/7] ARM: dts: at91: at91sam9x5: switch to new sckc bindings clk: at91: rework sckc bindings - - - --- 2019-02-19 Alexandre Belloni New
[3/7] clk: at91: sckc: handle different RC startup time clk: at91: rework sckc bindings - - - --- 2019-02-19 Alexandre Belloni New
[2/7] clk: at91: modernize sckc binding clk: at91: rework sckc bindings - - - --- 2019-02-19 Alexandre Belloni New
[1/7] dt-bindings: clock: at91: new sckc bindings clk: at91: rework sckc bindings - 1 - --- 2019-02-19 Alexandre Belloni New
ARM: lpc32xx: debug: add low-level debug support on hsuart ARM: lpc32xx: debug: add low-level debug support on hsuart - - - --- 2019-01-14 Alexandre Belloni New
[3/3] arm64: dts: fsl: ls1046a: disable uarts by default [RESEND,v2] MAINTAINERS: Add a maintainer for MSCC MIPS SoCs - - - --- 2018-12-18 Alexandre Belloni New
[RESEND,v2,2/3] arm64: dts: fsl: ls1046a: disable the flash controller by default [RESEND,v2] MAINTAINERS: Add a maintainer for MSCC MIPS SoCs - - - --- 2018-12-18 Alexandre Belloni New
[RESEND,v2] MAINTAINERS: Add a maintainer for MSCC MIPS SoCs [RESEND,v2] MAINTAINERS: Add a maintainer for MSCC MIPS SoCs - - - --- 2018-12-18 Alexandre Belloni New
[RESEND,v2,1/3] arm64: dts: fsl: use a generic node name for m25p80 flashes [RESEND,v2,1/3] arm64: dts: fsl: use a generic node name for m25p80 flashes - - - --- 2018-12-18 Alexandre Belloni New
[v3,7/7] ARM: dts: at91: at91sam9rl: switch to new clock bindings clk: at91: Rework DT bindings - - - --- 2018-11-12 Alexandre Belloni New
[v3,6/7] ARM: dts: at91: at91sam9x5: switch to new clock bindings clk: at91: Rework DT bindings - - - --- 2018-11-12 Alexandre Belloni New
[v3,5/7] ARM: dts: at91: at91sam9263: switch to new clock bindings clk: at91: Rework DT bindings - - - --- 2018-11-12 Alexandre Belloni New
[v3,4/7] ARM: dts: at91: at91sam9261: switch to new clock bindings clk: at91: Rework DT bindings - - - --- 2018-11-12 Alexandre Belloni New
[v3,3/7] ARM: dts: at91: at91sam9260: switch to new clock bindings clk: at91: Rework DT bindings - - - --- 2018-11-12 Alexandre Belloni New
[v3,2/7] ARM: dts: at91: sama5d2: switch to new binding clk: at91: Rework DT bindings - - - --- 2018-11-12 Alexandre Belloni New
[v3,1/7] ARM: dts: at91: sama5d4: switch to new clock bindings clk: at91: Rework DT bindings - - - --- 2018-11-12 Alexandre Belloni New
[RESEND] usb: gadget: udc: atmel: handle at91sam9rl PMC [RESEND] usb: gadget: udc: atmel: handle at91sam9rl PMC 1 - - --- 2018-10-15 Alexandre Belloni New
[GIT,PULL] ARM: at91: defconfig for 4.20 [GIT,PULL] ARM: at91: defconfig for 4.20 - - - --- 2018-09-25 Alexandre Belloni New
[GIT,PULL] ARM: at91: DT for 4.20 [GIT,PULL] ARM: at91: DT for 4.20 - - - --- 2018-09-25 Alexandre Belloni New
[GIT,PULL] ARM: at91: SoC for 4.20 [GIT,PULL] ARM: at91: SoC for 4.20 - - - --- 2018-09-25 Alexandre Belloni New
[GIT,PULL] ARM: at91: drivers for 4.20 [GIT,PULL] ARM: at91: drivers for 4.20 - - - --- 2018-09-25 Alexandre Belloni New
[GIT,PULL] ARM: at91: fixes for 4.19 [GIT,PULL] ARM: at91: fixes for 4.19 - - - --- 2018-09-24 Alexandre Belloni New
[3/3] rtc: ab8500: remove useless check [1/3] rtc: ab8500: use rtc_add_group 1 - - --- 2018-09-24 Alexandre Belloni New
[2/3] rtc: ab8500: let the core handle range [1/3] rtc: ab8500: use rtc_add_group 1 - - --- 2018-09-24 Alexandre Belloni New
[1/3] rtc: ab8500: use rtc_add_group [1/3] rtc: ab8500: use rtc_add_group - 1 - --- 2018-09-24 Alexandre Belloni New
[v7,7/7] ARM: configs: at91: unselect PIT clocksource: rework Atmel TCB timer driver - - - --- 2018-09-13 Alexandre Belloni New
[v7,6/7] ARM: configs: at91: use new TCB timer driver clocksource: rework Atmel TCB timer driver - - - --- 2018-09-13 Alexandre Belloni New
[v7,5/7] ARM: at91: Implement clocksource selection clocksource: rework Atmel TCB timer driver - - 1 --- 2018-09-13 Alexandre Belloni New
[v7,4/7] clocksource/drivers: atmel-pit: make option silent clocksource: rework Atmel TCB timer driver - - 1 --- 2018-09-13 Alexandre Belloni New
[v7,3/7] clocksource/drivers: timer-atmel-tcb: add clockevent device on separate channel clocksource: rework Atmel TCB timer driver - - - --- 2018-09-13 Alexandre Belloni New
[v7,2/7] clocksource/drivers: Add a new driver for the Atmel ARM TC blocks clocksource: rework Atmel TCB timer driver - - 2 --- 2018-09-13 Alexandre Belloni New
[v7,1/7] ARM: at91: add TCB registers definitions clocksource: rework Atmel TCB timer driver - - 2 --- 2018-09-13 Alexandre Belloni New
usb: gadget: udc: atmel: handle at91sam9rl PMC usb: gadget: udc: atmel: handle at91sam9rl PMC 1 - - --- 2018-09-10 Alexandre Belloni New
[3/3] rtc: pl031: switch to devm_rtc_allocate_device/rtc_register_device [1/3] rtc: mt6397: fix possible race condition 1 - - --- 2018-09-09 Alexandre Belloni New
[2/3] rtc: pl030: fix possible race condition [1/3] rtc: mt6397: fix possible race condition - - - --- 2018-09-09 Alexandre Belloni New
[1/3] rtc: mt6397: fix possible race condition [1/3] rtc: mt6397: fix possible race condition 1 - - --- 2018-09-09 Alexandre Belloni New
[v2,5/5] arm64: dts: add Microsys MPX-LS1046A SoM and SBC-LS1046A SBC [v2,1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes - - - --- 2018-09-03 Alexandre Belloni New
« 1 2 3 4 »