Show patches with: none      |   405291 patches
« 1 2 3 4 … 4052 4053 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[4/4] arm64: dts: renesas: r8a779g3: Add Renesas R-Car V4H Sparrow Hawk board support arm64: dts: renesas: r8a779g3: Add Renesas R-Car V4H Sparrow Hawk board support - - 1 --- 2025-03-30 Marek Vasut New
[3/4] dt-bindings: soc: renesas: Document Renesas R-Car V4H Sparrow Hawk board support arm64: dts: renesas: r8a779g3: Add Renesas R-Car V4H Sparrow Hawk board support - - - --- 2025-03-30 Marek Vasut New
[2/4] dt-bindings: vendor-prefixes: Add Retronix Technology Inc. arm64: dts: renesas: r8a779g3: Add Renesas R-Car V4H Sparrow Hawk board support - - - --- 2025-03-30 Marek Vasut New
[1/4] dt-bindings: PCI: rcar-gen4-pci-host: Document optional aux clock arm64: dts: renesas: r8a779g3: Add Renesas R-Car V4H Sparrow Hawk board support - - - --- 2025-03-30 Marek Vasut New
[v2,5/5] ARM: dts: vt8500: use correct ohci/ehci node names ARM: dts: use correct ohci/ehci node names - 1 - --- 2025-03-30 Wolfram Sang New
[v2,4/5] ARM: dts: ti: omap: use correct ohci/ehci node names ARM: dts: use correct ohci/ehci node names - 1 - --- 2025-03-30 Wolfram Sang New
[v2,3/5] ARM: dts: st: use correct ohci/ehci node names ARM: dts: use correct ohci/ehci node names - 1 - --- 2025-03-30 Wolfram Sang New
[v2,2/5] ARM: dts: nxp: lpc: use correct ohci/ehci node names ARM: dts: use correct ohci/ehci node names - 1 - --- 2025-03-30 Wolfram Sang New
[v2,1/5] ARM: dts: marvell: use correct ohci/ehci node names ARM: dts: use correct ohci/ehci node names - 1 - --- 2025-03-30 Wolfram Sang New
arm64: dts: amlogic: gxlx-s905l-p271: add saradc compatible arm64: dts: amlogic: gxlx-s905l-p271: add saradc compatible - 1 - --- 2025-03-30 Christian Hewitt New
[5/5] ARM: dts: vt8500: fix faulty ohci/ehci node names ARM: dts: fix faulty ohci/ehci node names - - - --- 2025-03-30 Wolfram Sang New
[4/5] ARM: dts: ti: omap: fix faulty ohci/ehci node names ARM: dts: fix faulty ohci/ehci node names - - - --- 2025-03-30 Wolfram Sang New
[3/5] ARM: dts: st: fix faulty ohci/ehci node names ARM: dts: fix faulty ohci/ehci node names - - - --- 2025-03-30 Wolfram Sang New
[2/5] ARM: dts: nxp: lpc: fix faulty ohci/ehci node names ARM: dts: fix faulty ohci/ehci node names - - - --- 2025-03-30 Wolfram Sang New
[1/5] ARM: dts: marvell: fix faulty ohci/ehci node names ARM: dts: fix faulty ohci/ehci node names - - - --- 2025-03-30 Wolfram Sang New
[v2] wifi: at76c50x: fix use after free access in at76_disconnect [v2] wifi: at76c50x: fix use after free access in at76_disconnect - - - --- 2025-03-30 Abdun Nihaal New
[v2,2/2] iio: adc: meson: add support for the GXLX SoC iio: adc: meson: add MPLL clock workaround for GXLX - 1 1 --- 2025-03-30 Martin Blumenstingl New
[v2,1/2] dt-bindings: iio: adc: amlogic,meson-saradc: Add GXLX SoC compatible iio: adc: meson: add MPLL clock workaround for GXLX 1 1 - --- 2025-03-30 Martin Blumenstingl New
Fix use after free access in at76_disconnect Fix use after free access in at76_disconnect - - - --- 2025-03-30 Abdun Nihaal New
[v2,4/4] PCI: j721e: Add support to build as a loadable module Loadable Module support for PCIe Cadence and J721E - - - --- 2025-03-30 Siddharth Vadapalli New
[v2,3/4] PCI: cadence-ep: Introduce cdns_pcie_ep_disable helper for cleanup Loadable Module support for PCIe Cadence and J721E - - - --- 2025-03-30 Siddharth Vadapalli New
[v2,2/4] PCI: cadence-host: Introduce cdns_pcie_host_disable helper for cleanup Loadable Module support for PCIe Cadence and J721E - 1 - --- 2025-03-30 Siddharth Vadapalli New
[v2,1/4] PCI: cadence: Add support to build pcie-cadence library as a kernel module Loadable Module support for PCIe Cadence and J721E - 1 - --- 2025-03-30 Siddharth Vadapalli New
[GIT,PULL] Mailbox changes for v6.15 [GIT,PULL] Mailbox changes for v6.15 - - - --- 2025-03-29 Jassi Brar New
[v2,2/2] phy: amlogic: meson8b-usb2: Use the regmap_{clear,set}_bits helpers phy: amlogic: meson8b-usb2: two small cleanup patches - 1 - --- 2025-03-29 Martin Blumenstingl New
[v2,1/2] phy: amlogic: meson8b-usb2: Use FIELD_PREP instead of _SHIFT macros phy: amlogic: meson8b-usb2: two small cleanup patches - 1 - --- 2025-03-29 Martin Blumenstingl New
pinctrl: meson: define the pull up/down resistor value as 60 kOhm pinctrl: meson: define the pull up/down resistor value as 60 kOhm - - - --- 2025-03-29 Martin Blumenstingl New
[7/7] arm64: dts: amlogic: a1: enable UART RX and TX pull up by default dts: amlogic: enable UART RX and TX pull up by default - - - --- 2025-03-29 Martin Blumenstingl New
[6/7] arm64: dts: amlogic: axg: enable UART RX and TX pull up by default dts: amlogic: enable UART RX and TX pull up by default - - - --- 2025-03-29 Martin Blumenstingl New
[5/7] arm64: dts: amlogic: g12: enable UART RX and TX pull up by default dts: amlogic: enable UART RX and TX pull up by default - - - --- 2025-03-29 Martin Blumenstingl New
[4/7] arm64: dts: amlogic: gxl: enable UART RX and TX pull up by default dts: amlogic: enable UART RX and TX pull up by default - - - --- 2025-03-29 Martin Blumenstingl New
[3/7] arm64: dts: amlogic: gxbb: enable UART RX and TX pull up by default dts: amlogic: enable UART RX and TX pull up by default - - - --- 2025-03-29 Martin Blumenstingl New
[2/7] ARM: dts: amlogic: meson8b: enable UART RX and TX pull up by default dts: amlogic: enable UART RX and TX pull up by default - - - --- 2025-03-29 Martin Blumenstingl New
[1/7] ARM: dts: amlogic: meson8: enable UART RX and TX pull up by default dts: amlogic: enable UART RX and TX pull up by default - - - --- 2025-03-29 Martin Blumenstingl New
pinctrl: apple: Make regmap_config static const and fix indentation pinctrl: apple: Make regmap_config static const and fix indentation - - - --- 2025-03-29 John Madieu New
[v2] arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down [v2] arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down - 1 - --- 2025-03-29 Sam Edwards New
[v2] ARM: multi_v7_defconfig add /proc/config.gz [v2] ARM: multi_v7_defconfig add /proc/config.gz - - - --- 2025-03-29 David Heidelberg New
[4/4] mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe() mfd: exynos-lpass: Fix some error handling paths - - - --- 2025-03-29 Christophe JAILLET New
[3/4] mfd: exynos-lpass: Move exynos_lpass_remove() mfd: exynos-lpass: Fix some error handling paths - - - --- 2025-03-29 Christophe JAILLET New
[2/4] mfd: exynos-lpass: Avoid calling exynos_lpass_disable() twice in exynos_lpass_remove() mfd: exynos-lpass: Fix some error handling paths - 1 - --- 2025-03-29 Christophe JAILLET New
[1/4] mfd: exynos-lpass: Fix an error handling path in exynos_lpass_probe() mfd: exynos-lpass: Fix some error handling paths - 1 - --- 2025-03-29 Christophe JAILLET New
[3/3] KVM: arm64: Fix boot warning with kvm-arm.mode=nvhe on !FEAT_E2H0 platforms Two minor fixups around FEAT_E2H0 - - - --- 2025-03-29 Yicong Yang New
[2/3] arm64/cpufeature: Add cpucap for HCR_EL2.E2H RES1 (!FEAT_E2H0) Two minor fixups around FEAT_E2H0 - - - --- 2025-03-29 Yicong Yang New
[1/3] arm64/cpufeature: Add missing id_aa64mmfr4 feature reg update Two minor fixups around FEAT_E2H0 - - - --- 2025-03-29 Yicong Yang New
pinctrl: mediatek: Fix the invalid conditions pinctrl: mediatek: Fix the invalid conditions - - - --- 2025-03-29 Hao Chang New
Subject: [PATCH] usb: gadget: aspeed: Add NULL check in the ast_vhub_init_dev Subject: [PATCH] usb: gadget: aspeed: Add NULL check in the ast_vhub_init_dev - - - --- 2025-03-29 Henry Martin New
[v4,2/2] kasan: Add strscpy() test to trigger tag fault on arm64 string: Add load_unaligned_zeropad() code path to sized_strscpy() - 1 - --- 2025-03-29 Peter Collingbourne New
[v4,1/2] string: Add load_unaligned_zeropad() code path to sized_strscpy() string: Add load_unaligned_zeropad() code path to sized_strscpy() - - - --- 2025-03-29 Peter Collingbourne New
coresight: catu: Introduce refcount and spinlock for enabling/disabling coresight: catu: Introduce refcount and spinlock for enabling/disabling - - - --- 2025-03-28 Yabin Cui New
[v5,1/1] scsi: ufs: core: add device level exception support [v5,1/1] scsi: ufs: core: add device level exception support - 3 - --- 2025-03-28 Bao D. Nguyen New
ARM: dts: stm32: Add nvmem-cells to ethernet nodes for constant mac-addresses ARM: dts: stm32: Add nvmem-cells to ethernet nodes for constant mac-addresses - - - --- 2025-03-28 Uwe Kleine-König New
[v4,3/3] power: reset: syscon-reboot: add gs101-specific reset support Linux reboot modes in syscon-reboot on gs101 (Google Pixel) - - - --- 2025-03-28 André Draszik New
[v4,2/3] dt-bindings: soc: samsung: exynos-pmu: update reset for gs101 support Linux reboot modes in syscon-reboot on gs101 (Google Pixel) - - - --- 2025-03-28 André Draszik New
[v4,1/3] dt-bindings: power: reset: google,gs101-reboot: add Google GS101 specific reset support Linux reboot modes in syscon-reboot on gs101 (Google Pixel) - - - --- 2025-03-28 André Draszik New
[4/4] wifi: ath12k: switch to PCI_PWRCTRL_PWRSEQ PCI/arm64/ath11k/ath12k: Rename pwrctrl Kconfig symbols - - - --- 2025-03-28 Johan Hovold New
[3/4] wifi: ath11k: switch to PCI_PWRCTRL_PWRSEQ PCI/arm64/ath11k/ath12k: Rename pwrctrl Kconfig symbols - - - --- 2025-03-28 Johan Hovold New
[2/4] arm64: Kconfig: switch to HAVE_PWRCTRL PCI/arm64/ath11k/ath12k: Rename pwrctrl Kconfig symbols - - - --- 2025-03-28 Johan Hovold New
[1/4] PCI/pwrctrl: Rename pwrctrl Kconfig symbols and slot module PCI/arm64/ath11k/ath12k: Rename pwrctrl Kconfig symbols - - - --- 2025-03-28 Johan Hovold New
[2/2] fpga: zynq-fpga: Allow ICAP enable on probe [1/2] dt-bindings: fpga: zynq: Document ICAP on boot - - - --- 2025-03-28 Sam Winchenbach New
[1/2] dt-bindings: fpga: zynq: Document ICAP on boot [1/2] dt-bindings: fpga: zynq: Document ICAP on boot - - - --- 2025-03-28 Sam Winchenbach New
[v2,2/2] clocksource/drivers/nxp-timer: Add the System Timer Module for the s32g platform [v2,1/2] dt-bindings: timer: Add NXP System Timer Module - - - --- 2025-03-28 Daniel Lezcano New
[v2,1/2] dt-bindings: timer: Add NXP System Timer Module [v2,1/2] dt-bindings: timer: Add NXP System Timer Module - - - --- 2025-03-28 Daniel Lezcano New
[v2,3/4] ARM: dts: nxp: mxs: Adjust XEA board's DTS to support L2 switch net: mtip: Add support for MTIP imx287 L2 switch driver - - - --- 2025-03-28 Lukasz Majewski New
[v2,2/4] ARM: dts: nxp: mxs: Adjust the imx28.dtsi L2 switch description net: mtip: Add support for MTIP imx287 L2 switch driver - - - --- 2025-03-28 Lukasz Majewski New
[v2,1/4] dt-bindings: net: Add MTIP L2 switch description net: mtip: Add support for MTIP imx287 L2 switch driver - - - --- 2025-03-28 Lukasz Majewski New
[v2,32/32] MAINTAINERS: add myself as reviewer for Samsung S2M MFD Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,31/32] rtc: s5m: replace open-coded read/modify/write registers with regmap helpers Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,30/32] rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,29/32] rtc: s5m: switch to devm_device_init_wakeup Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,28/32] rtc: s5m: fix a typo: peding -> pending Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,27/32] rtc: s5m: add support for S2MPG10 RTC Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,26/32] rtc: s5m: prepare for external regmap Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,25/32] rtc: s5m: cache value of platform_get_device_id() during probe Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,24/32] clk: s2mps11: add support for S2MPG10 PMIC clock Samsung S2MPG10 PMIC MFD-based drivers 1 - - --- 2025-03-28 André Draszik New
[v2,23/32] mfd: sec: add myself as module author Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,22/32] mfd: sec: convert to using REGMAP_IRQ_REG() macros Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,21/32] mfd: sec: convert to using MFD_CELL macros Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,20/32] mfd: sec: use sizeof(*var), not sizeof(struct type_of_var) Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,19/32] mfd: sec: don't compare against NULL / 0 for errors, use ! Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,18/32] mfd: sec: change device_type to int Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,17/32] mfd: sec: rework platform data and regmap instantiating Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,16/32] mfd: sec: don't ignore errors from sec_irq_init() Samsung S2MPG10 PMIC MFD-based drivers - 1 - --- 2025-03-28 André Draszik New
[v2,15/32] mfd: sec: s2dos05: doesn't support interrupts (it seems) Samsung S2MPG10 PMIC MFD-based drivers - 1 - --- 2025-03-28 André Draszik New
[v2,14/32] mfd: sec: s2dos05/s2mpu05: use explicit regmap config and drop default Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,13/32] mfd: sec: use dev_err_probe() where appropriate Samsung S2MPG10 PMIC MFD-based drivers - 1 - --- 2025-03-28 André Draszik New
[v2,12/32] mfd: sec: sort struct of_device_id entries and the device type switch Samsung S2MPG10 PMIC MFD-based drivers - 1 - --- 2025-03-28 André Draszik New
[v2,11/32] mfd: sec: fix open parenthesis alignment (multiple) Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,10/32] mfd: sec: merge separate core and irq modules Samsung S2MPG10 PMIC MFD-based drivers - 1 - --- 2025-03-28 André Draszik New
[v2,09/32] mfd: sec: add support for S2MPG10 PMIC Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,08/32] mfd: sec: split into core and transport (i2c) drivers Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,07/32] mfd: sec: move private internal API to internal header Samsung S2MPG10 PMIC MFD-based drivers - 1 - --- 2025-03-28 André Draszik New
[v2,06/32] mfd: sec: update includes to add missing and remove superfluous ones Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,05/32] mfd: sec: sort includes alphabetically Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,04/32] mfd: sec: drop non-existing forward declarations Samsung S2MPG10 PMIC MFD-based drivers - 1 - --- 2025-03-28 André Draszik New
[v2,03/32] dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[v2,02/32] dt-bindings: clock: samsung,s2mps11: add s2mpg10 Samsung S2MPG10 PMIC MFD-based drivers 2 - - --- 2025-03-28 André Draszik New
[v2,01/32] dt-bindings: mfd: samsung,s2mps11: add s2mpg10 Samsung S2MPG10 PMIC MFD-based drivers - - - --- 2025-03-28 André Draszik New
[3/3] arm64: dts: add imx8mp-libra-rdk-fpsc LVDS panel overlay Add new imx imx8mp-libra-rdk-fpsc SBC - - - --- 2025-03-28 Yannic Moog New
[2/3] arm64: dts: add imx8mp-libra-rdk-fpsc board Add new imx imx8mp-libra-rdk-fpsc SBC - - - --- 2025-03-28 Yannic Moog New
[1/3] dt-bindings: add imx8mp-libra-rdk-fpsc Add new imx imx8mp-libra-rdk-fpsc SBC - - - --- 2025-03-28 Yannic Moog New
« 1 2 3 4 … 4052 4053 »