diff mbox series

[31/44] arm64: dts: renesas: r8a77990: sort pciec0 node within soc node

Message ID 003233351d4411caf993267f407b5c0a0ae76dd3.1548233325.git.horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show
Series [GIT,PULL] Renesas ARM64 Based SoC DT Updates for v5.1 | expand

Commit Message

Simon Horman Jan. 24, 2019, 3:12 p.m. UTC 
Move the pciec0 node so that sub-nodes of the soc node are
sorted by bus address.

This change has no run-time affect.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 54 +++++++++++++++----------------
 1 file changed, 27 insertions(+), 27 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index b2f606e286ce..bdc7f7d39820 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1526,6 +1526,33 @@ 
 			resets = <&cpg 408>;
 		};
 
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77990",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
 		vspb0: vsp@fe960000 {
 			compatible = "renesas,vsp2";
 			reg = <0 0xfe960000 0 0x8000>;
@@ -1724,33 +1751,6 @@ 
 			};
 		};
 
-		pciec0: pcie@fe000000 {
-			compatible = "renesas,pcie-r8a77990",
-				     "renesas,pcie-rcar-gen3";
-			reg = <0 0xfe000000 0 0x80000>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			bus-range = <0x00 0xff>;
-			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
-			clock-names = "pcie", "pcie_bus";
-			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
-			resets = <&cpg 319>;
-			status = "disabled";
-		};
-
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;