diff mbox series

[15/22] ARM: dts: rza2mevb: Add USB Host support

Message ID 003ddc67e62672279134c85dc2609a913b89d64b.1561104194.git.horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show
Series [GIT,PULL] Renesas ARM Based SoC DT Updates for v5.3 | expand

Commit Message

Simon Horman June 21, 2019, 9:13 a.m. UTC 
From: Chris Brandt <chris.brandt@renesas.com>

Enable USB Host support for both the Type-C connector on the CPU board
and the Type-A plug on the sub board.

Both boards are also capable of USB Device operation as well after the
appropriate Device Tree modifications.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s9210-rza2mevb.dts | 36 ++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
index fa44e35e0fda..e140168da573 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -107,6 +107,18 @@ 
 		pinmux = <RZA2_PINMUX(PORT5, 4, 3)>,	/* SD1_CD */
 			 <RZA2_PINMUX(PORT5, 5, 3)>;	/* SD1_WP */
 	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZA2_PINMUX(PORT5, 2, 3)>,	/* VBUSIN0 */
+			 <RZA2_PINMUX(PORTC, 6, 1)>,	/* VBUSEN0 */
+			 <RZA2_PINMUX(PORTC, 7, 1)>;	/* OVRCUR0 */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZA2_PINMUX(PORTC, 0, 1)>,	/* VBUSIN1 */
+			 <RZA2_PINMUX(PORTC, 5, 1)>,	/* VBUSEN1 */
+			 <RZA2_PINMUX(PORT7, 5, 5)>;	/* OVRCUR1 */
+	};
 };
 
 /* High resolution System tick timers */
@@ -161,3 +173,27 @@ 
 	bus-width = <4>;
 	status = "okay";
 };
+
+/* USB-0 as Host */
+&usb2_phy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";	/* Requires JP3 to be fitted */
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+/* USB-1 as Host */
+&usb2_phy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};