[net-next,v8,3/8] net: stmmac: Introduce stmmac_fpe_supported()

Commit Message

Furong Xu Nov. 1, 2024, 1:31 p.m. UTC

A single "priv->dma_cap.fpesel" checks HW capability only,
while both HW capability and driver capability shall be
checked by later refactoring to prevent unexpected behavior
for FPE on unsupported MAC cores and keep FPE as an optional
implementation for current and new MAC cores.

Signed-off-by: Furong Xu <[e-mail]>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c     |  5 +++++
 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h     |  1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c    | 10 +++++-----
 4 files changed, 12 insertions(+), 6 deletions(-)

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 2792a4c6cbcd..704019e2755b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -1271,7 +1271,7 @@  static int stmmac_get_mm(struct net_device *ndev,
 	unsigned long flags;
 	u32 frag_size;
 
-	if (!priv->dma_cap.fpesel)
+	if (!stmmac_fpe_supported(priv))
 		return -EOPNOTSUPP;
 
 	spin_lock_irqsave(&priv->fpe_cfg.lock, flags);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
index 41c9cccfb5de..2b99033f9425 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
@@ -27,6 +27,11 @@ 
 #define STMMAC_MAC_FPE_CTRL_STS_SVER	BIT(1)
 #define STMMAC_MAC_FPE_CTRL_STS_EFPE	BIT(0)
 
+bool stmmac_fpe_supported(struct stmmac_priv *priv)
+{
+	return priv->dma_cap.fpesel;
+}
+
 void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 			  u32 num_txq, u32 num_rxq,
 			  bool tx_enable, bool pmac_enable)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
index 25725fd5182f..fc9d869f9b6a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
@@ -23,6 +23,7 @@  struct stmmac_fpe_cfg;
 
 void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up);
 void stmmac_fpe_event_status(struct stmmac_priv *priv, int status);
+bool stmmac_fpe_supported(struct stmmac_priv *priv);
 void stmmac_fpe_init(struct stmmac_priv *priv);
 void stmmac_fpe_apply(struct stmmac_priv *priv);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 20bd5440abca..342edec8b507 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -978,7 +978,7 @@  static void stmmac_mac_link_down(struct phylink_config *config,
 	priv->eee_enabled = stmmac_eee_init(priv);
 	stmmac_set_eee_pls(priv, priv->hw, false);
 
-	if (priv->dma_cap.fpesel)
+	if (stmmac_fpe_supported(priv))
 		stmmac_fpe_link_state_handle(priv, false);
 }
 
@@ -1092,7 +1092,7 @@  static void stmmac_mac_link_up(struct phylink_config *config,
 		stmmac_set_eee_pls(priv, priv->hw, true);
 	}
 
-	if (priv->dma_cap.fpesel)
+	if (stmmac_fpe_supported(priv))
 		stmmac_fpe_link_state_handle(priv, true);
 
 	if (priv->plat->flags & STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY)
@@ -4040,7 +4040,7 @@  static int stmmac_release(struct net_device *dev)
 
 	stmmac_release_ptp(priv);
 
-	if (priv->dma_cap.fpesel)
+	if (stmmac_fpe_supported(priv))
 		timer_shutdown_sync(&priv->fpe_cfg.verify_timer);
 
 	pm_runtime_put(priv->device);
@@ -5955,7 +5955,7 @@  static void stmmac_common_interrupt(struct stmmac_priv *priv)
 		stmmac_est_irq_status(priv, priv, priv->dev,
 				      &priv->xstats, tx_cnt);
 
-	if (priv->dma_cap.fpesel) {
+	if (stmmac_fpe_supported(priv)) {
 		int status = stmmac_fpe_irq_status(priv, priv->ioaddr,
 						   priv->dev);
 
@@ -7745,7 +7745,7 @@  int stmmac_suspend(struct device *dev)
 	}
 	rtnl_unlock();
 
-	if (priv->dma_cap.fpesel)
+	if (stmmac_fpe_supported(priv))
 		timer_shutdown_sync(&priv->fpe_cfg.verify_timer);
 
 	priv->speed = SPEED_UNKNOWN;