@@ -11,6 +11,8 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
@@ -77,6 +79,21 @@
marvell,function = "gpio";
};
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
poweroff: poweroff {
marvell,pins = "mpp8";
marvell,function = "gpio";
@@ -84,7 +101,7 @@
};
mdio {
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
};
@@ -117,78 +134,76 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- g762_clk: fixedclk {
+ g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
- gpio_leds {
+ gpio-leds {
compatible = "gpio-leds";
- pinctrl-0 = < &power_led_pin
- &sata1_led_pin
- &sata2_led_pin
- &backup_led_pin >;
+ pinctrl-0 = <&power_led_pin
+ &sata1_led_pin
+ &sata2_led_pin
+ &backup_led_pin>;
pinctrl-names = "default";
- blue_power_led {
+ blue-power-led {
label = "rn102:blue:pwr";
- gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */
+ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
- green_sata1_led {
+ green-sata1-led {
label = "rn102:green:sata1";
- gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- green_sata2_led {
+ green-sata2-led {
label = "rn102:green:sata2";
- gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- green_backup_led {
+ green-backup-led {
label = "rn102:green:backup";
- gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */
+ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
+ pinctrl-0 = <&power_button_pin
+ &reset_button_pin
+ &backup_button_pin>;
+ pinctrl-names = "default";
- button@1 {
+ power-button {
label = "Power Button";
- linux,code = <116>; /* KEY_POWER */
- gpios = <&gpio1 30 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
- button@2 {
+ reset-button {
label = "Reset Button";
- linux,code = <0x198>; /* KEY_RESTART */
- gpios = <&gpio0 6 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
- button@3 {
+ backup-button {
label = "Backup Button";
- linux,code = <133>; /* KEY_COPY */
- gpios = <&gpio1 26 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
};
};
- gpio_poweroff {
+ gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
-
};
The patch does some cleanup work on NETGEAR ReadyNAS 102 .dts file. Changes are listed below - Added missing button mpp in pinctrl - Converted from value to macros for GPIO voltage level - Converted all numeric input key values to macros - Added GPIO keys pins to pinctrl - Made button names more explicit - Document ethernet PHY (Marvell 88E1318) via a comment - Made G762 clock node name unique by including g762 in it - Fixed all node names and labels to use respectively '-' and '_' - Changed order of included files from general to local - Removed useless clocks and gpio-keys properties Signed-off-by: Arnaud Ebalard <arno@natisbad.org> --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 81 +++++++++++++++----------- 1 file changed, 48 insertions(+), 33 deletions(-)