@@ -157,11 +157,13 @@ i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- irps5401_43: irps54012@43 { /* IRPS5401 - u175 */
- reg = <0x43>;
+ irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
+ compatible = "infineon,irps5401";
+ reg = <0x43>; /* pmbus / i2c 0x13 */
};
- irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */
- reg = <0x4d>;
+ irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
+ compatible = "infineon,irps5401";
+ reg = <0x44>; /* pmbus / i2c 0x14 */
};
};
@@ -326,13 +326,16 @@ i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */
+ irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
+ compatible = "infineon,irps5401";
reg = <0x43>;
};
- irps5401_44: irps54012@44 { /* IRPS5401 - u55 */
+ irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
+ compatible = "infineon,irps5401";
reg = <0x44>;
};
- irps5401_45: irps54012@45 { /* IRPS5401 - u57 */
+ irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
+ compatible = "infineon,irps5401";
reg = <0x45>;
};
/* u68 IR38064 +0 */
- Add compatible string for irps5401 chip. - Do not use irps54012 as device node which is not correct. - Fix addresses of irps5401/u180 on zcu104 revisions. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: None arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 10 ++++++---- arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 9 ++++++--- 2 files changed, 12 insertions(+), 7 deletions(-)