@@ -40,3 +40,4 @@ obj-$(CONFIG_GPIO_SX150X) += sx150x.o
obj-$(CONFIG_GPIO_VX855) += vx855_gpio.o
obj-$(CONFIG_GPIO_ML_IOH) += ml_ioh_gpio.o
obj-$(CONFIG_AB8500_GPIO) += ab8500-gpio.o
+obj-$(CONFIG_ARCH_MXS) += gpio-mxs.o
new file mode 100644
@@ -0,0 +1,371 @@
+/*
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * Based on code from Freescale,
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <mach/mxs.h>
+
+struct mxs_gpio_port {
+ void __iomem *base;
+ int id;
+ int irq;
+ int irq_high;
+ int virtual_irq_start;
+ struct gpio_chip chip;
+};
+
+#define MXS_SET 0x4
+#define MXS_CLR 0x8
+
+#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
+#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
+#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
+#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
+#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
+#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
+#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
+#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
+
+#define GPIO_INT_FALL_EDGE 0x0
+#define GPIO_INT_LOW_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_HIGH_LEV 0x3
+#define GPIO_INT_LEV_MASK (1 << 0)
+#define GPIO_INT_POL_MASK (1 << 1)
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
+{
+ writel(1 << index, port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR);
+}
+
+static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
+ int enable)
+{
+ if (enable) {
+ writel(1 << index,
+ port->base + PINCTRL_IRQEN(port->id) + MXS_SET);
+ writel(1 << index,
+ port->base + PINCTRL_PIN2IRQ(port->id) + MXS_SET);
+ } else {
+ writel(1 << index,
+ port->base + PINCTRL_IRQEN(port->id) + MXS_CLR);
+ }
+}
+
+static void mxs_gpio_ack_irq(struct irq_data *d)
+{
+ struct mxs_gpio_port *port = irq_data_get_irq_chip_data(d);
+ u32 gpio = irq_to_gpio(d->irq);
+ clear_gpio_irqstatus(port, gpio & 0x1f);
+}
+
+static void mxs_gpio_mask_irq(struct irq_data *d)
+{
+ struct mxs_gpio_port *port = irq_data_get_irq_chip_data(d);
+ u32 gpio = irq_to_gpio(d->irq);
+ set_gpio_irqenable(port, gpio & 0x1f, 0);
+}
+
+static void mxs_gpio_unmask_irq(struct irq_data *d)
+{
+ struct mxs_gpio_port *port = irq_data_get_irq_chip_data(d);
+ u32 gpio = irq_to_gpio(d->irq);
+ set_gpio_irqenable(port, gpio & 0x1f, 1);
+}
+
+static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
+
+static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ u32 pin_mask = 1 << (gpio & 31);
+ struct mxs_gpio_port *port = irq_data_get_irq_chip_data(d);
+ void __iomem *pin_addr;
+ int edge;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ edge = GPIO_INT_RISE_EDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ edge = GPIO_INT_FALL_EDGE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ edge = GPIO_INT_LOW_LEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ edge = GPIO_INT_HIGH_LEV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set level or edge */
+ pin_addr = port->base + PINCTRL_IRQLEV(port->id);
+ if (edge & GPIO_INT_LEV_MASK)
+ writel(pin_mask, pin_addr + MXS_SET);
+ else
+ writel(pin_mask, pin_addr + MXS_CLR);
+
+ /* set polarity */
+ pin_addr = port->base + PINCTRL_IRQPOL(port->id);
+ if (edge & GPIO_INT_POL_MASK)
+ writel(pin_mask, pin_addr + MXS_SET);
+ else
+ writel(pin_mask, pin_addr + MXS_CLR);
+
+ clear_gpio_irqstatus(port, gpio & 0x1f);
+
+ return 0;
+}
+
+/* MXS has one interrupt *per* gpio port */
+static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 irq_stat;
+ struct mxs_gpio_port *port = irq_get_handler_data(irq);
+ u32 gpio_irq_no_base = port->virtual_irq_start;
+
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+ irq_stat = readl(port->base + PINCTRL_IRQSTAT(port->id)) &
+ readl(port->base + PINCTRL_IRQEN(port->id));
+
+ while (irq_stat != 0) {
+ int irqoffset = fls(irq_stat) - 1;
+ generic_handle_irq(gpio_irq_no_base + irqoffset);
+ irq_stat &= ~(1 << irqoffset);
+ }
+}
+
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param irq interrupt source number
+ * @param enable enable as wake-up if equal to non-zero
+ * @return This function returns 0 on success.
+ */
+static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ u32 gpio_idx = gpio & 0x1f;
+ struct mxs_gpio_port *port = irq_data_get_irq_chip_data(d);
+
+ if (enable) {
+ if (port->irq_high && (gpio_idx >= 16))
+ enable_irq_wake(port->irq_high);
+ else
+ enable_irq_wake(port->irq);
+ } else {
+ if (port->irq_high && (gpio_idx >= 16))
+ disable_irq_wake(port->irq_high);
+ else
+ disable_irq_wake(port->irq);
+ }
+
+ return 0;
+}
+
+static struct irq_chip gpio_irq_chip = {
+ .name = "mxs gpio",
+ .irq_ack = mxs_gpio_ack_irq,
+ .irq_mask = mxs_gpio_mask_irq,
+ .irq_unmask = mxs_gpio_unmask_irq,
+ .irq_set_type = mxs_gpio_set_irq_type,
+ .irq_set_wake = mxs_gpio_set_wake_irq,
+};
+
+static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+ int dir)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+ void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
+
+ if (dir)
+ writel(1 << offset, pin_addr + MXS_SET);
+ else
+ writel(1 << offset, pin_addr + MXS_CLR);
+}
+
+static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+
+ return (readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
+}
+
+static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+ void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
+
+ if (value)
+ writel(1 << offset, pin_addr + MXS_SET);
+ else
+ writel(1 << offset, pin_addr + MXS_CLR);
+}
+
+static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+
+ return port->virtual_irq_start + offset;
+}
+
+static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ mxs_set_gpio_direction(chip, offset, 0);
+ return 0;
+}
+
+static int mxs_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ mxs_gpio_set(chip, offset, value);
+ mxs_set_gpio_direction(chip, offset, 1);
+ return 0;
+}
+
+static int __devinit mxs_gpio_probe(struct platform_device *pdev)
+{
+ static void __iomem *base;
+ struct mxs_gpio_port *port;
+ struct resource *iores = NULL;
+ int err, i;
+
+ port = kzalloc(sizeof(struct mxs_gpio_port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+
+ port->id = pdev->id;
+ port->virtual_irq_start = MXS_GPIO_IRQ_START + port->id * 32;
+
+ /*
+ * map memory region only once, as all the gpio ports
+ * share the same one
+ */
+ if (!base) {
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ err = -ENODEV;
+ goto out_kfree;
+ }
+
+ if (!request_mem_region(iores->start, resource_size(iores),
+ pdev->name)) {
+ err = -EBUSY;
+ goto out_kfree;
+ }
+
+ base = ioremap(iores->start, resource_size(iores));
+ if (!base) {
+ err = -ENOMEM;
+ goto out_release_mem;
+ }
+ }
+ port->base = base;
+
+ port->irq = platform_get_irq(pdev, 0);
+ if (port->irq < 0) {
+ err = -EINVAL;
+ goto out_iounmap;
+ }
+
+ /* disable the interrupt and clear the status */
+ writel(0, port->base + PINCTRL_PIN2IRQ(port->id));
+ writel(0, port->base + PINCTRL_IRQEN(port->id));
+
+ /* clear address has to be used to clear IRQSTAT bits */
+ writel(~0U, port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR);
+
+ for (i = port->virtual_irq_start;
+ i < port->virtual_irq_start + 32; i++) {
+ irq_set_chip_and_handler(i, &gpio_irq_chip,
+ handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ irq_set_chip_data(i, port);
+ }
+
+ /* setup one handler for each entry */
+ irq_set_chained_handler(port->irq, mxs_gpio_irq_handler);
+ irq_set_handler_data(port->irq, port);
+
+ /* register gpio chip */
+ port->chip.direction_input = mxs_gpio_direction_input;
+ port->chip.direction_output = mxs_gpio_direction_output;
+ port->chip.get = mxs_gpio_get;
+ port->chip.set = mxs_gpio_set;
+ port->chip.to_irq = mxs_gpio_to_irq;
+ port->chip.base = port->id * 32;
+ port->chip.ngpio = 32;
+
+ err = gpiochip_add(&port->chip);
+ if (err)
+ goto out_iounmap;
+
+ platform_set_drvdata(pdev, port);
+
+ return 0;
+
+out_iounmap:
+ if (iores)
+ iounmap(port->base);
+out_release_mem:
+ if (iores)
+ release_mem_region(iores->start, resource_size(iores));
+out_kfree:
+ kfree(port);
+ dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
+ return err;
+}
+
+static struct platform_driver mxs_gpio_driver = {
+ .driver = {
+ .name = "gpio-mxs",
+ },
+ .probe = mxs_gpio_probe,
+};
+
+static int __init mxs_gpio_init(void)
+{
+ return platform_driver_register(&mxs_gpio_driver);
+}
+postcore_initcall(mxs_gpio_init);
+
+MODULE_AUTHOR("Freescale Semiconductor, "
+ "Daniel Mack <danielncaiaq.de>, "
+ "Juergen Beisert <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Freescale MXS GPIO");
+MODULE_LICENSE("GPL");
Add gpio-mxs driver by copying arch/arm/mach-mxs/gpio.c into drivers/gpio with the following changes. * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Migrate to platform driver by adding .probe function Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/gpio/Makefile | 1 + drivers/gpio/gpio-mxs.c | 371 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 372 insertions(+), 0 deletions(-) create mode 100644 drivers/gpio/gpio-mxs.c