@@ -37,7 +37,9 @@
#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
struct mxc_gpio_port {
+ struct list_head node;
void __iomem *base;
+ int id;
int irq;
int irq_high;
int virtual_irq_start;
@@ -47,4 +47,5 @@ obj-$(CONFIG_GPIO_SX150X) += sx150x.o
obj-$(CONFIG_GPIO_VX855) += vx855_gpio.o
obj-$(CONFIG_GPIO_ML_IOH) += ml_ioh_gpio.o
obj-$(CONFIG_AB8500_GPIO) += ab8500-gpio.o
+obj-$(CONFIG_ARCH_MXC) += gpio-mxc.o
obj-$(CONFIG_GPIO_TPS65910) += tps65910-gpio.o
new file mode 100644
@@ -0,0 +1,423 @@
+/*
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * Based on code from Freescale,
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <mach/hardware.h>
+#include <asm-generic/bug.h>
+
+/*
+ * MX2 has one interrupt *for all* gpio ports. The list is used
+ * to save the references to all ports, so that mx2_gpio_irq_handler
+ * can walk through all interrupt status registers.
+ */
+static LIST_HEAD(mxc_gpio_ports);
+
+#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2())
+
+#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00)
+#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04)
+#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08)
+#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
+#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
+#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
+#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
+
+#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
+#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
+#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2)
+#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3)
+#define GPIO_INT_NONE 0x4
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
+{
+ writel(1 << index, port->base + GPIO_ISR);
+}
+
+static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
+ int enable)
+{
+ u32 l;
+
+ l = readl(port->base + GPIO_IMR);
+ l = (l & (~(1 << index))) | (!!enable << index);
+ writel(l, port->base + GPIO_IMR);
+}
+
+static void gpio_ack_irq(struct irq_data *d)
+{
+ struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
+ u32 gpio = irq_to_gpio(d->irq);
+ _clear_gpio_irqstatus(port, gpio & 0x1f);
+}
+
+static void gpio_mask_irq(struct irq_data *d)
+{
+ struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
+ u32 gpio = irq_to_gpio(d->irq);
+ _set_gpio_irqenable(port, gpio & 0x1f, 0);
+}
+
+static void gpio_unmask_irq(struct irq_data *d)
+{
+ struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
+ u32 gpio = irq_to_gpio(d->irq);
+ _set_gpio_irqenable(port, gpio & 0x1f, 1);
+}
+
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
+static int gpio_set_irq_type(struct irq_data *d, u32 type)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
+ u32 bit, val;
+ int edge;
+ void __iomem *reg = port->base;
+
+ port->both_edges &= ~(1 << (gpio & 31));
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ edge = GPIO_INT_RISE_EDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ edge = GPIO_INT_FALL_EDGE;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val = mxc_gpio_get(&port->chip, gpio & 31);
+ if (val) {
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+ } else {
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+ }
+ port->both_edges |= 1 << (gpio & 31);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ edge = GPIO_INT_LOW_LEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ edge = GPIO_INT_HIGH_LEV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+ bit = gpio & 0xf;
+ val = readl(reg) & ~(0x3 << (bit << 1));
+ writel(val | (edge << (bit << 1)), reg);
+ _clear_gpio_irqstatus(port, gpio & 0x1f);
+
+ return 0;
+}
+
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+ void __iomem *reg = port->base;
+ u32 bit, val;
+ int edge;
+
+ reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+ bit = gpio & 0xf;
+ val = readl(reg);
+ edge = (val >> (bit << 1)) & 3;
+ val &= ~(0x3 << (bit << 1));
+ if (edge == GPIO_INT_HIGH_LEV) {
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+ } else if (edge == GPIO_INT_LOW_LEV) {
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+ } else {
+ pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+ gpio, edge);
+ return;
+ }
+ writel(val | (edge << (bit << 1)), reg);
+}
+
+/* handle 32 interrupts in one status register */
+static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
+{
+ u32 gpio_irq_no_base = port->virtual_irq_start;
+
+ while (irq_stat != 0) {
+ int irqoffset = fls(irq_stat) - 1;
+
+ if (port->both_edges & (1 << irqoffset))
+ mxc_flip_edge(port, irqoffset);
+
+ generic_handle_irq(gpio_irq_no_base + irqoffset);
+
+ irq_stat &= ~(1 << irqoffset);
+ }
+}
+
+/* MX1 and MX3 has one interrupt *per* gpio port */
+static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 irq_stat;
+ struct mxc_gpio_port *port = irq_get_handler_data(irq);
+
+ irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
+
+ mxc_gpio_irq_handler(port, irq_stat);
+}
+
+/* MX2 has one interrupt *for all* gpio ports */
+static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 irq_msk, irq_stat;
+ struct mxc_gpio_port *port;
+
+ /* walk through all interrupt status registers */
+ list_for_each_entry(port, &mxc_gpio_ports, node) {
+ irq_msk = readl(port->base + GPIO_IMR);
+ if (!irq_msk)
+ continue;
+
+ irq_stat =readl(port->base + GPIO_ISR) & irq_msk;
+ if (irq_stat)
+ mxc_gpio_irq_handler(port, irq_stat);
+ }
+}
+
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param irq interrupt source number
+ * @param enable enable as wake-up if equal to non-zero
+ * @return This function returns 0 on success.
+ */
+static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ u32 gpio_idx = gpio & 0x1F;
+ struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
+
+ if (enable) {
+ if (port->irq_high && (gpio_idx >= 16))
+ enable_irq_wake(port->irq_high);
+ else
+ enable_irq_wake(port->irq);
+ } else {
+ if (port->irq_high && (gpio_idx >= 16))
+ disable_irq_wake(port->irq_high);
+ else
+ disable_irq_wake(port->irq);
+ }
+
+ return 0;
+}
+
+static struct irq_chip gpio_irq_chip = {
+ .name = "GPIO",
+ .irq_ack = gpio_ack_irq,
+ .irq_mask = gpio_mask_irq,
+ .irq_unmask = gpio_unmask_irq,
+ .irq_set_type = gpio_set_irq_type,
+ .irq_set_wake = gpio_set_wake_irq,
+};
+
+static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+ int dir)
+{
+ struct mxc_gpio_port *port =
+ container_of(chip, struct mxc_gpio_port, chip);
+ u32 l;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ l = readl(port->base + GPIO_GDIR);
+ if (dir)
+ l |= 1 << offset;
+ else
+ l &= ~(1 << offset);
+ writel(l, port->base + GPIO_GDIR);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mxc_gpio_port *port =
+ container_of(chip, struct mxc_gpio_port, chip);
+ void __iomem *reg = port->base + GPIO_DR;
+ u32 l;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ l = (readl(reg) & (~(1 << offset))) | (!!value << offset);
+ writel(l, reg);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct mxc_gpio_port *port =
+ container_of(chip, struct mxc_gpio_port, chip);
+
+ return (readl(port->base + GPIO_PSR) >> offset) & 1;
+}
+
+static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ _set_gpio_direction(chip, offset, 0);
+ return 0;
+}
+
+static int mxc_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ mxc_gpio_set(chip, offset, value);
+ _set_gpio_direction(chip, offset, 1);
+ return 0;
+}
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static int __devinit mxc_gpio_probe(struct platform_device *pdev)
+{
+ struct mxc_gpio_port *port;
+ struct resource *iores;
+ int err, i;
+
+ port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+
+ port->id = pdev->id;
+ port->virtual_irq_start = MXC_GPIO_IRQ_START + port->id * 32;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ err = -ENODEV;
+ goto out_kfree;
+ }
+
+ if (!request_mem_region(iores->start, resource_size(iores),
+ pdev->name)) {
+ err = -EBUSY;
+ goto out_kfree;
+ }
+
+ port->base = ioremap(iores->start, resource_size(iores));
+ if (!port->base) {
+ err = -ENOMEM;
+ goto out_release_mem;
+ }
+
+ port->irq_high = platform_get_irq(pdev, 1);
+ port->irq = platform_get_irq(pdev, 0);
+ if (port->irq < 0) {
+ err = -EINVAL;
+ goto out_iounmap;
+ }
+
+ /* disable the interrupt and clear the status */
+ writel(0, port->base + GPIO_IMR);
+ writel(~0, port->base + GPIO_ISR);
+
+ for (i = port->virtual_irq_start;
+ i < port->virtual_irq_start + 32; i++) {
+ irq_set_lockdep_class(i, &gpio_lock_class);
+ irq_set_chip_and_handler(i, &gpio_irq_chip, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ irq_set_chip_data(i, port);
+ }
+
+ if (cpu_is_mx2()) {
+ /* setup one handler for all GPIO interrupts */
+ if (port->id == 0)
+ irq_set_chained_handler(port->irq,
+ mx2_gpio_irq_handler);
+ } else {
+ /* setup one handler for each entry */
+ irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
+ irq_set_handler_data(port->irq, port);
+ if (port->irq_high > 0) {
+ /* setup handler for GPIO 16 to 31 */
+ irq_set_chained_handler(port->irq_high,
+ mx3_gpio_irq_handler);
+ irq_set_handler_data(port->irq_high, port);
+ }
+ }
+
+ /* register gpio chip */
+ port->chip.direction_input = mxc_gpio_direction_input;
+ port->chip.direction_output = mxc_gpio_direction_output;
+ port->chip.get = mxc_gpio_get;
+ port->chip.set = mxc_gpio_set;
+ port->chip.base = port->id * 32;
+ port->chip.ngpio = 32;
+
+ spin_lock_init(&port->lock);
+
+ err = gpiochip_add(&port->chip);
+ if (err)
+ goto out_iounmap;
+
+ list_add_tail(&port->node, &mxc_gpio_ports);
+
+ return 0;
+
+out_iounmap:
+ iounmap(port->base);
+out_release_mem:
+ release_mem_region(iores->start, resource_size(iores));
+out_kfree:
+ kfree(port);
+ dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
+ return err;
+}
+
+static struct platform_driver mxc_gpio_driver = {
+ .driver = {
+ .name = "gpio-mxc",
+ },
+ .probe = mxc_gpio_probe,
+};
+
+static int __init gpio_mxc_init(void)
+{
+ return platform_driver_register(&mxc_gpio_driver);
+}
+postcore_initcall(gpio_mxc_init);
+
+MODULE_AUTHOR("Freescale Semiconductor, "
+ "Daniel Mack <danielncaiaq.de>, "
+ "Juergen Beisert <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Freescale MXC GPIO");
+MODULE_LICENSE("GPL");
Add gpio-mxc driver by copying arch/arm/plat-mxc/gpio.c into drivers/gpio with the following changes. * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Migrate to platform driver by adding .probe function * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/plat-mxc/include/mach/gpio.h | 2 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-mxc.c | 423 +++++++++++++++++++++++++++++++++ 3 files changed, 426 insertions(+), 0 deletions(-) create mode 100644 drivers/gpio/gpio-mxc.c