Message ID | 1307337761-10606-1-git-send-email-shawn.guo@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Mon, Jun 06, 2011 at 01:22:41PM +0800, Shawn Guo wrote: > The gpio-mxc controller complies with basic_mmio_gpio library. The > patch convert the driver to use the library. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Applied, thanks. g. > --- > The patch is based on the series below. > > [PATCH v4 0/2] Move plat-mxc gpio driver into drivers/gpio > > Thanks Jamie Iles for reminding this work. > > drivers/gpio/Kconfig | 1 + > drivers/gpio/gpio-mxc.c | 83 ++++++++--------------------------------------- > 2 files changed, 15 insertions(+), 69 deletions(-) > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index 5f00b41..d973abd 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -96,6 +96,7 @@ config GPIO_EXYNOS4 > config GPIO_MXC > def_bool y > depends on ARCH_MXC > + select GPIO_BASIC_MMIO_CORE > > config GPIO_PLAT_SAMSUNG > bool "Samsung SoCs GPIO library support" > diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c > index 844079a..b351952893 100644 > --- a/drivers/gpio/gpio-mxc.c > +++ b/drivers/gpio/gpio-mxc.c > @@ -26,6 +26,7 @@ > #include <linux/gpio.h> > #include <linux/platform_device.h> > #include <linux/slab.h> > +#include <linux/basic_mmio_gpio.h> > #include <mach/hardware.h> > #include <asm-generic/bug.h> > > @@ -35,9 +36,8 @@ struct mxc_gpio_port { > int irq; > int irq_high; > int virtual_irq_start; > - struct gpio_chip chip; > + struct bgpio_chip bgc; > u32 both_edges; > - spinlock_t lock; > }; > > /* > @@ -101,8 +101,6 @@ static void gpio_unmask_irq(struct irq_data *d) > _set_gpio_irqenable(port, gpio & 0x1f, 1); > } > > -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); > - > static int gpio_set_irq_type(struct irq_data *d, u32 type) > { > u32 gpio = irq_to_gpio(d->irq); > @@ -120,7 +118,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type) > edge = GPIO_INT_FALL_EDGE; > break; > case IRQ_TYPE_EDGE_BOTH: > - val = mxc_gpio_get(&port->chip, gpio & 31); > + val = gpio_get_value(gpio & 31); > if (val) { > edge = GPIO_INT_LOW_LEV; > pr_debug("mxc: set GPIO %d to low trigger\n", gpio); > @@ -259,60 +257,6 @@ static struct irq_chip gpio_irq_chip = { > .irq_set_wake = gpio_set_wake_irq, > }; > > -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, > - int dir) > -{ > - struct mxc_gpio_port *port = > - container_of(chip, struct mxc_gpio_port, chip); > - u32 l; > - unsigned long flags; > - > - spin_lock_irqsave(&port->lock, flags); > - l = readl(port->base + GPIO_GDIR); > - if (dir) > - l |= 1 << offset; > - else > - l &= ~(1 << offset); > - writel(l, port->base + GPIO_GDIR); > - spin_unlock_irqrestore(&port->lock, flags); > -} > - > -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) > -{ > - struct mxc_gpio_port *port = > - container_of(chip, struct mxc_gpio_port, chip); > - void __iomem *reg = port->base + GPIO_DR; > - u32 l; > - unsigned long flags; > - > - spin_lock_irqsave(&port->lock, flags); > - l = (readl(reg) & (~(1 << offset))) | (!!value << offset); > - writel(l, reg); > - spin_unlock_irqrestore(&port->lock, flags); > -} > - > -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) > -{ > - struct mxc_gpio_port *port = > - container_of(chip, struct mxc_gpio_port, chip); > - > - return (readl(port->base + GPIO_PSR) >> offset) & 1; > -} > - > -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) > -{ > - _set_gpio_direction(chip, offset, 0); > - return 0; > -} > - > -static int mxc_gpio_direction_output(struct gpio_chip *chip, > - unsigned offset, int value) > -{ > - mxc_gpio_set(chip, offset, value); > - _set_gpio_direction(chip, offset, 1); > - return 0; > -} > - > /* > * This lock class tells lockdep that GPIO irqs are in a different > * category than their parents, so it won't report false recursion. > @@ -385,24 +329,25 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) > } > } > > - /* register gpio chip */ > - port->chip.direction_input = mxc_gpio_direction_input; > - port->chip.direction_output = mxc_gpio_direction_output; > - port->chip.get = mxc_gpio_get; > - port->chip.set = mxc_gpio_set; > - port->chip.base = pdev->id * 32; > - port->chip.ngpio = 32; > + err = bgpio_init(&port->bgc, &pdev->dev, 4, > + port->base + GPIO_PSR, > + port->base + GPIO_DR, NULL, > + port->base + GPIO_GDIR, NULL, false); > + if (err) > + goto out_iounmap; > > - spin_lock_init(&port->lock); > + port->bgc.gc.base = pdev->id * 32; > > - err = gpiochip_add(&port->chip); > + err = gpiochip_add(&port->bgc.gc); > if (err) > - goto out_iounmap; > + goto out_bgpio_remove; > > list_add_tail(&port->node, &mxc_gpio_ports); > > return 0; > > +out_bgpio_remove: > + bgpio_remove(&port->bgc); > out_iounmap: > iounmap(port->base); > out_release_mem: > -- > 1.7.4.1 >
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 5f00b41..d973abd 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -96,6 +96,7 @@ config GPIO_EXYNOS4 config GPIO_MXC def_bool y depends on ARCH_MXC + select GPIO_BASIC_MMIO_CORE config GPIO_PLAT_SAMSUNG bool "Samsung SoCs GPIO library support" diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 844079a..b351952893 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -26,6 +26,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/basic_mmio_gpio.h> #include <mach/hardware.h> #include <asm-generic/bug.h> @@ -35,9 +36,8 @@ struct mxc_gpio_port { int irq; int irq_high; int virtual_irq_start; - struct gpio_chip chip; + struct bgpio_chip bgc; u32 both_edges; - spinlock_t lock; }; /* @@ -101,8 +101,6 @@ static void gpio_unmask_irq(struct irq_data *d) _set_gpio_irqenable(port, gpio & 0x1f, 1); } -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); - static int gpio_set_irq_type(struct irq_data *d, u32 type) { u32 gpio = irq_to_gpio(d->irq); @@ -120,7 +118,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type) edge = GPIO_INT_FALL_EDGE; break; case IRQ_TYPE_EDGE_BOTH: - val = mxc_gpio_get(&port->chip, gpio & 31); + val = gpio_get_value(gpio & 31); if (val) { edge = GPIO_INT_LOW_LEV; pr_debug("mxc: set GPIO %d to low trigger\n", gpio); @@ -259,60 +257,6 @@ static struct irq_chip gpio_irq_chip = { .irq_set_wake = gpio_set_wake_irq, }; -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = readl(port->base + GPIO_GDIR); - if (dir) - l |= 1 << offset; - else - l &= ~(1 << offset); - writel(l, port->base + GPIO_GDIR); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - void __iomem *reg = port->base + GPIO_DR; - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = (readl(reg) & (~(1 << offset))) | (!!value << offset); - writel(l, reg); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - - return (readl(port->base + GPIO_PSR) >> offset) & 1; -} - -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - _set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxc_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxc_gpio_set(chip, offset, value); - _set_gpio_direction(chip, offset, 1); - return 0; -} - /* * This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. @@ -385,24 +329,25 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) } } - /* register gpio chip */ - port->chip.direction_input = mxc_gpio_direction_input; - port->chip.direction_output = mxc_gpio_direction_output; - port->chip.get = mxc_gpio_get; - port->chip.set = mxc_gpio_set; - port->chip.base = pdev->id * 32; - port->chip.ngpio = 32; + err = bgpio_init(&port->bgc, &pdev->dev, 4, + port->base + GPIO_PSR, + port->base + GPIO_DR, NULL, + port->base + GPIO_GDIR, NULL, false); + if (err) + goto out_iounmap; - spin_lock_init(&port->lock); + port->bgc.gc.base = pdev->id * 32; - err = gpiochip_add(&port->chip); + err = gpiochip_add(&port->bgc.gc); if (err) - goto out_iounmap; + goto out_bgpio_remove; list_add_tail(&port->node, &mxc_gpio_ports); return 0; +out_bgpio_remove: + bgpio_remove(&port->bgc); out_iounmap: iounmap(port->base); out_release_mem:
The gpio-mxc controller complies with basic_mmio_gpio library. The patch convert the driver to use the library. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- The patch is based on the series below. [PATCH v4 0/2] Move plat-mxc gpio driver into drivers/gpio Thanks Jamie Iles for reminding this work. drivers/gpio/Kconfig | 1 + drivers/gpio/gpio-mxc.c | 83 ++++++++--------------------------------------- 2 files changed, 15 insertions(+), 69 deletions(-)