@@ -194,7 +194,6 @@ struct omap_i2c_dev {
*/
u8 rev;
unsigned b_hw:1; /* bad h/w fixes */
- unsigned idle:1;
u16 iestate; /* Saved interrupt register */
u16 pscstate;
u16 scllstate;
@@ -269,12 +268,8 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
struct omap_i2c_bus_platform_data *pdata;
- WARN_ON(!dev->idle);
-
pdata = dev->dev->platform_data;
- pm_runtime_get_sync(dev->dev);
-
if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
@@ -285,7 +280,6 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
}
- dev->idle = 0;
/*
* Don't write to this register if the IE state is 0 as it can
@@ -300,8 +294,6 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
struct omap_i2c_bus_platform_data *pdata;
u16 iv;
- WARN_ON(dev->idle);
-
pdata = dev->dev->platform_data;
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
@@ -315,12 +307,9 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
} else {
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
- /* Flush posted write before the dev->idle store occurs */
+ /* Flush posted write */
omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
}
- dev->idle = 1;
-
- pm_runtime_put_sync(dev->dev);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -645,7 +634,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
int i;
int r;
- omap_i2c_unidle(dev);
+ pm_runtime_get_sync(dev->dev);
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
@@ -668,7 +657,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
omap_i2c_wait_for_bb(dev);
out:
- omap_i2c_idle(dev);
+ pm_runtime_put_sync(dev->dev);
return r;
}
@@ -728,7 +717,7 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id)
struct omap_i2c_dev *dev = dev_id;
u16 iv, w;
- if (dev->idle)
+ if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
@@ -820,7 +809,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
pdata = dev->dev->platform_data;
- if (dev->idle)
+ if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
@@ -1022,7 +1011,6 @@ omap_i2c_probe(struct platform_device *pdev)
}
dev->speed = speed;
- dev->idle = 1;
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, resource_size(mem));
@@ -1041,7 +1029,7 @@ omap_i2c_probe(struct platform_device *pdev)
dev->regs = (u8 *)reg_map_ip_v1;
pm_runtime_enable(dev->dev);
- omap_i2c_unidle(dev);
+ pm_runtime_get_sync(dev->dev);
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
@@ -1088,7 +1076,7 @@ omap_i2c_probe(struct platform_device *pdev)
dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
- omap_i2c_idle(dev);
+ pm_runtime_put_sync(dev->dev);
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
@@ -1112,7 +1100,7 @@ err_free_irq:
free_irq(dev->irq, dev);
err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_idle(dev);
+ pm_runtime_put_sync(dev->dev);
iounmap(dev->base);
err_free_mem:
platform_set_drvdata(pdev, NULL);
@@ -1141,7 +1129,27 @@ omap_i2c_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_SUSPEND
+#ifdef CONFIG_PM
+static int omap_i2c_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+ omap_i2c_idle(_dev);
+
+ return 0;
+}
+
+static int omap_i2c_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+ omap_i2c_unidle(_dev);
+
+ return 0;
+}
+
static int omap_i2c_suspend(struct device *dev)
{
if (!pm_runtime_suspended(dev))
@@ -1163,6 +1171,8 @@ static int omap_i2c_resume(struct device *dev)
static struct dev_pm_ops omap_i2c_pm_ops = {
.suspend = omap_i2c_suspend,
.resume = omap_i2c_resume,
+ .runtime_suspend = omap_i2c_runtime_suspend,
+ .runtime_resume = omap_i2c_runtime_resume,
};
#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
#else
Current usage of runtime PM is not quite correct. The actual idle/unidle of the I2C hardware should not happen until the runtime PM callbacks are called. Therefore, change omap_i2c_[un]idle() functions to only be called from the runtime PM callbacks (when usage count transitions to/from zero.) Also, the runtime PM core does usage counting and replaces functionality currently managed by the dev->idle flag. Remove usage of dev->idle in favor of using runtime PM, and checking status using pm_runtime_suspended(). Signed-off-by: Kevin Hilman <khilman@ti.com> --- drivers/i2c/busses/i2c-omap.c | 52 ++++++++++++++++++++++++---------------- 1 files changed, 31 insertions(+), 21 deletions(-)