| Message ID | 1308577033-10678-1-git-send-email-fabio.estevam@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jun 20, 2011 at 10:37:13AM -0300, Fabio Estevam wrote: > Original code was assuming that the CSPI1 pins on the > MX31PDK were the primary pin function, which is incorrect. > > On MX31PDK board these are the pins that provide CSPI1 functionality: > > DSR_DCE1 (ALT mode 1) --> CSPI1_CLK > RI_DCE1 (ALT mode 1) --> CSPI1_RDY > > DTR_DTE1 -->CSI1_MOSI > DSR_DTE1 --> CSPI1_MISO > DTR_DCE2 ---> CSPI1_SS2 > > The 3 IOMUX settings above are done via GPR as per Table A-1 of the MX31RM. > > This patch fixes the CSPI1 IOMUX and makes the LCD to be functional. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Applied to -for-next Sascha > --- > Changes since v1: > > - Provided better explanation about this change on the commit message > > arch/arm/mach-imx/mach-mx31_3ds.c | 10 +++++----- > 1 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c > index ab2a626..a6160ee 100644 > --- a/arch/arm/mach-imx/mach-mx31_3ds.c > +++ b/arch/arm/mach-imx/mach-mx31_3ds.c > @@ -53,11 +53,8 @@ static int mx31_3ds_pins[] = { > MX31_PIN_RXD1__RXD1, > IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), > /*SPI0*/ > - MX31_PIN_CSPI1_SCLK__SCLK, > - MX31_PIN_CSPI1_MOSI__MOSI, > - MX31_PIN_CSPI1_MISO__MISO, > - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, > - MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */ > + IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1), > + IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1), > /* SPI 1 */ > MX31_PIN_CSPI2_SCLK__SCLK, > MX31_PIN_CSPI2_MOSI__MOSI, > @@ -690,6 +687,9 @@ static void __init mx31_3ds_init(void) > int ret; > > imx31_soc_init(); > + > + /* Configure SPI1 IOMUX */ > + mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true); > > mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), > "mx31_3ds"); > -- > 1.6.0.4 > > >
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index ab2a626..a6160ee 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -53,11 +53,8 @@ static int mx31_3ds_pins[] = { MX31_PIN_RXD1__RXD1, IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /*SPI0*/ - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */ + IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1), /* SPI 1 */ MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_MOSI__MOSI, @@ -690,6 +687,9 @@ static void __init mx31_3ds_init(void) int ret; imx31_soc_init(); + + /* Configure SPI1 IOMUX */ + mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true); mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds");
Original code was assuming that the CSPI1 pins on the MX31PDK were the primary pin function, which is incorrect. On MX31PDK board these are the pins that provide CSPI1 functionality: DSR_DCE1 (ALT mode 1) --> CSPI1_CLK RI_DCE1 (ALT mode 1) --> CSPI1_RDY DTR_DTE1 -->CSI1_MOSI DSR_DTE1 --> CSPI1_MISO DTR_DCE2 ---> CSPI1_SS2 The 3 IOMUX settings above are done via GPR as per Table A-1 of the MX31RM. This patch fixes the CSPI1 IOMUX and makes the LCD to be functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- Changes since v1: - Provided better explanation about this change on the commit message arch/arm/mach-imx/mach-mx31_3ds.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-)